Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Headphones & Audio Pro Audio & Sound Recording

    APC Smart UPS 3000VA LCD RM 2U 230V with SmartConnect

    FJ $7,265.93 excl. VAT

    APC Smart UPS 3000VA LCD RM 2U 230V with SmartConnect

    the selected product is not available.

    UPS - Line Interactive

    Description

    Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
    Includes: CD with software, Documentation CD, Rack mounting hardware, Rack Mounting support rails, USB cable
    Adjustable voltage sensitivity
    Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
    Adjustable voltage-transfer points
    Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
    Audible alarms
    Provides notification of changing utility power and UPS power conditions
    Automatic restart of loads after UPS shutdown
    Automatically starts up the connected equipment upon the return of utility power.
    Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
    Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
    Boost and Trim Automatic Voltage Regulation (AVR)
    Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
    Cold-start capable
    Provides temporary battery power when the utility power is out.
    Disconnected battery notification
    Warns when a battery is not available to provide backup power.
    Energy meter
    Provides actual kilowatt hours of usage for energy conscious users.
    Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
    Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
    High online efficiency
    Reduces utility costs, generates less heat.
    Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
    Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
    Intuitive LCD interface
    Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
    LED Indicators
    Provide easy-to-read status of the unit and utility power conditions.
    Network manageable
    Provides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions.
    Outlet group control
    Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
    Predictive failure notification.
    Provides early-warning fault analysis ensuring proactive component replacement.
    Predictive replace battery date
    Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
    Pure sine wave output on battery
    Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
    Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
    Sequenced network shutdown and reboot
    Customize network shutdown and reboot sequence of connected servers and UPSs.
    Serial connectivity
    Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
    Single switched outlet group
    Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
    SmartConnect
    Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
    StruxureWare Data Center Expert compatible
    Enables centralized management via StruxureWare Data Center Expert.
    Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
    USB connectivity
    Provides management of the UPS via a USB port (not available on all models).
    User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
    Wide input voltage range
    Designed for harsh electrical environments to save battery life.






    APC Warranty Info
    All APC UPS’s have a 3 year warranty however the batteries on these UPS’s are only supported for 2 years. You can check the factory warranty of an APC UPS by following this link: http://www.apc.com/site/support/nz/en/warranty-services







    Output
    Output power capacity
    2.7kWatts / 3.0kVA
    Max Configurable Power (Watts)
    2.7kWatts / 3.0kVA
    Nominal Output Voltage
    230V
    Output Voltage Note
    Configurable for 220 : 230 or 240 nominal output voltage
    Output Voltage Distortion
    Less than 5%
    Output Frequency (sync to mains)
    50/60Hz +/- 3 Hz
    Other Output Voltages
    220, 240
    Topology
    Line Interactive
    Waveform type
    Sine wave
    Output Connections
    (3) IEC Jumpers (Battery Backup) (8) IEC 320 C13 (Battery Backup) (1) IEC 320 C19 (Battery Backup)
    Transfer Time
    6ms typical : 10ms maximum
    Input
    Nominal Input Voltage
    230V
    Input frequency
    50/60 Hz +/- 3 Hz (auto sensing)
    Input Connections
    British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
    Cord Length
    1,83meters
    Input voltage range for main operations
    160 - 286V
    Input voltage adjustable range for mains operation
    151 - 302V
    Number of Power Cords
    1
    Other Input Voltages
    220, 240
    Batteries & Runtime
    Battery type
    Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
    Typical recharge time
    3hour(s)
    Replacement Battery
    APC Replacement Battery Cartridge #43
    Expected Battery Life (years)
    3 - 5
    RBC Quantity
    1
    Runtime
    Full load (2700 Watts) - 3.2 mins Half load (1350 Watts) - 11.5 mins
    Communications & Management
    Interface Port(s)
    RJ-45 Serial, SmartSlot, USB
    Control panel
    Multi-function LCD status and control console
    Audible Alarm
    Alarm when on battery : distinctive low battery alarm : configurable delays
    Available SmartSlot™ Interface Quantity
    1
    Surge Protection and Filtering
    Surge energy rating
    320Joules
    Physical
    Maximum Height
    86MM, 8.6CM
    Maximum Width
    480MM, 48.0CM
    Maximum Depth
    683MM, 68.3CM
    Rack Height
    2U
    Net Weight
    44.28KG
    Shipping weight
    51.7KG
    Shipping Height
    254MM, 25.4CM
    Shipping Width
    600MM, 60.0CM
    Shipping Depth
    980MM, 98.0CM
    Units per Pallet
    8.0
    Environmental
    Operating Temperature
    0 - 40 °C
    Operating Relative Humidity
    0 - 95 %
    Operating Elevation
    0-3000meters
    Storage Temperature
    -15 - 45 °C
    Storage Relative Humidity
    0 - 95 %
    Storage Elevation
    0-15000meters
    Audible noise at 1 meter from surface of unit
    55.0dBA
    Online thermal dissipation
    348.0BTU/hr
    Conformance
    Approvals
    CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE
    Standard warranty
    3 years repair or replace (excluding battery) and 2 year for battery
    Sustainable Offer Status
    RoHS
    Compliant
    REACH
    REACH: Contains No SVHCs


    Manufacturer Part No:

    SMT3000RMI2UC
    Brand:

    APC

    Product Type:

    -
    UPC

    731304337348
    Product Family:

    -
    Shipping Weight:

    51.7 kg
    PB Part No:

    UPSAPC3001
    Product Model:

    -



    Warranty:
    36 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like