Home More Car Electronics Other Automotive Accessories

DYNAMAT 10455 XTREME BULK PACK SOUND DEADENING (457mm x 812mm x 1.72mm) 9 SHEETS

FJ $561.89 excl. VAT

DYNAMAT 10455 XTREME BULK PACK SOUND DEADENING (457mm x 812mm x 1.72mm) 9 SHEETS

the selected product is not available.

Other Automotive Accessories

Description

Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts!
Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is coated with aluminum for high temperature areas such as firewalls and floors. Depending on your needs, choose Dynamat Xtreme in either application-specific kits (pre-cut material in appropriately-sized pieces) or in sheets you can cut to fit.
Kit contains nine 18? x 32? pieces of Dynamat Xtreme for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

Having a hard time hearing your car's sound system over the road noise? Dynamat Xtreme keeps the noise out, so you'll hear more music using less power - effectively increasing your amplifier's output! This sheet metal vibration damping material (a butyl composite with a layer of aluminum) conforms and fuses to automotive body surfaces such as floor pans and doors.
The 10455 bulk kit includes 9 sheets of Dynamat Xtreme, for a total of about 36 square feet (a car door requires about 5 square feet). Designed especially for high-temperature areas and high sound pressure level situations, Dynamat Xtreme offers four times the damping power of Original Dynamat, thanks to its energy-reflective aluminum layer.
Contains 9 sheets of material 457mm x 812mm
Applications
Dynamat Xtreme can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Dynamat Xtreme is used to treat metal panels, partitions, ducts, doors, bins, panels, and so forth in railroad cars, buses, automobiles, and ships. It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-produced noise.
Installation
Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.




Temperature Range (Optimal performance)
14°F to+140°F (-10°C to +60°C)
Chemical Resistance
Resistant to water and mineral oils
Package Weight
23 pounds
Package Dimensions
21" L x 12" W x 3" H


Manufacturer Part No:

10455
Brand:

DYNAMAT

Product Type:

-
UPC

769103104557
Product Family:

-
Shipping Weight:

8.5 kg
PB Part No:

CARDNM1022
Product Model:

-



Warranty:
12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like