Home Phones & Accessories Mobile Phone Cases

Eaton 5P Tower UPS, 1150VA / 770W, LCD, Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)

FJ $1,840.23 excl. VAT

Eaton 5P Tower UPS, 1150VA / 770W, LCD, Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)

the selected product is not available.

UPS - Line Interactive

Description

The new Eaton 5P is the next generation of 650VA-1550VA line-Interactive UPS with advanced LCD and energy metering feature. 5P is the perfect UPS to protect IT & networking devices such as servers, switches, routers and storage devices, in tower or rack format.
- The graphical LCD display provides clear information on the UPS's status and measurements on a single screen. Enhanced configuration capabilities are also available with easy-to-use navigation keys. - Meters energy consumption and provides kWH values through the LCD and Intelligent Power Software - Load segment control enables prioritised shutdows of nonessential equipment to maximise battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups. - With an optimised electrical design, the 5P can provide a high quality output signal for any sensitive equipment connected, such as active PFC servers. - 5P is available as a tower or rack form factor to cater for varied deployment applications - Stronger longer battery life Eaton ABM battery management technology uses an innovative three-stage charging technique that only recharges the battery when necessary, so the battery experiences less corrosion and service life is prolonged by up to 50% - Batteries can be hot-swapped without ever having to shut down connected equipment. With an optional hot-swap maintenance bypass module, you can even replace the entire UPS.

Ideal for Protecting
- Servers - Switches - Routers - Storage devices




Topology
Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Configuration
Tower
Backup/Run Time (Full Load)
4 Minute
Backup/Run Time (Half Load)
11 Minute
Rating (VA/Watts)
1150/770
Connection
1 x Aust. 10A
Input Voltage Without Using Batteries
160V-294V (adjustable to 150V-294V)
Input frequency Range Without Using Batteries
47 to 70Hz (50 Hz system), 56.5 to 70Hz (60 Hz system), 40Hz in low-sensitivity mode
Voltages
230 V (+6/-10 %) (Adjustable to 200V / 220V / 230V / 240V)
Output Receptacles
(3) IEC-320-C13, (2) Aust. 10A
Remotely controlled sockets
2 groups of 1 x AU (10 A) output receptacles
Output Frequency
50/60 Hz +/- 0.1 % (autosensing)
Battery Management
ABM & temperature compensated charging method (user selectable), automatic battery test, deep discharge protection
Cold start (No mains power)
Yes
User Interface
3 LEDS + Multilingual LCD access to measures, alarm messages and customization
Communication Ports
1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously), 1 mini-terminal block for remote ON/OFF and Remote Power Off
Communications Card Slots
1 slot for Network-MS card, ModBus-MS or Relay-MS cards
Audible Noise
< 40 dBA
Operating Temperature
0 to 35°C
Safety markings
IEC/EN 62040-1
EMC Markings
IEC/EN 62040-2 class B (EMC), IEC/EN 62040-3 (performance), C-Tick
Approvals
CE, CB report
Quality
Designed, manufactured and marketed under ISO9001 & ISO14001 quality system
Dimensions (H x W x D)
230 x 150 x 345mm
Weight (kg)
11.1
Package Contents
5P UPS Eaton Intelligent Power Software CD USB cable Serial cable Safety guide Quick start guide CD with 10-language user manual


Manufacturer Part No:

5P1150AU
Brand:

Eaton

Product Type:

Tower UPS,
UPC

743172042880
Product Family:

5P
Shipping Weight:

12.51 kg
PB Part No:

UPSPWR62663
Product Model:

-



Warranty:
36 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like