Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Headphones & Audio DACs, Amplifiers & Sound Cards External Sound Cards

    Fenix Bicycle LED Light BC05R V2.0 Rechargeable Tail Light Max 15 Lumens Build-in 400mAh Li-polymer Battery, USB-C Charging Port

    FJ $64.30 excl. VAT

    Fenix Bicycle LED Light BC05R V2.0 Rechargeable Tail Light Max 15 Lumens Build-in 400mAh Li-polymer Battery, USB-C Charging Port, Bike Rear Flashlight & Torch, Battery and USB Charging Cable are Included - 2 Years Free Repair Warranty

    the selected product is not available.

    Scooter & Bike Lights

    Description

    Warning:
    - The taillight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone's eyes. - The LED of this taillight is not designed to replaceable; so the entire light should be replaced when the LED reaches the end of its life. - If any of the information provided in this manual is changed, the new version of the manual shall prevail; if your included user manual is an old one, it acquiesces that we won't send a new manual.
    Warranty: 2-Years Free Repair Warranty (Battery included)!

    The upgraded Fenix BC05R V2.0 version is an ultra-compact rechargeable bicycle taillight with an eye-catching red light built for cycling commuters and lovers. Being seen far away in traffic with 15-lumen red light and 180° lighting angle will help make your bicycle commute much safer and provides peace of mind on your cycling trip. Quickly charge the BC05R V2.0 via the USB Type-C interface, the built-in 400mAh Li-polymer battery delivers a max runtime of 120 hours. With the included body clip, the versatile taillight can be used as a headlamp, chest lamp or backpack light.
    Size: 2.01'' x 0.87'' x 0.87'' / 51 x 22 x 22 mm Weight: 0.99 oz / 28 g (including battery) Battery Type: Included one 400mAh Li-polymer battery
    - 15 lumens maximum output; 120 hours maximum runtime. - 5 red light LED. - Built-in 400mAh Li-polymer battery. - USB Type-C charging port. - IP66 rated protection - Matched with the body clip, can be used as a backpack light, chest light. - Battery level indication for remaining battery level checking.


    Operating Instructions:
    On/off: Press and hold the switch for 0.5 seconds to turn on/off the light.
    Output Selection: With the light switched on, single click the switch to cycle through Low, Low Flash (slow), Low Flash (fast), High, High Flash (slow), High Flash (fast).
    Charging:Remove the dust cover of the bicycle taillight to reveal the charging port, and plug the USB Type-C end of the charging cable into the light's charging port, then connect the other end of the charging cable to a USB power adapter.
    Charging Indication: The indicator will display red while charging and will turn green when fully charged.
    Battery Level Indication: With the light switched off, single click the switch to check the battery status, the indicator in the switch will last for 3 seconds.
    - Green light on: saturated 100% - 85% - Green light flashes: sufficient 85% - 50% - Red light on: poor 50% - 25% - Red light flashes: critical 25% - 0%
    Low-voltage Warning: When the voltage level drops below 25% of the total level, the battery level indicator blinks red to remind you to timely recharge the battery. To ensure normal use, the light will not turn off automatically and will work till the battery level runs out.

    Mounting Instruction: Mounting strap: First loop the mounting strap (without LOGO) around the small opening of the taillight, and place the taillight on the seat post (face up), then loop the other end of the mounting strap (with LOGO) around the other small opening of the taillight, adjust as the size of the seat post.
    Body clip: Keep the body clip and the taillight both face up, push the small opening on both sides of the taillight downward to the spout of the body clip.
    Note: The bicycle light is applicable to bike seat post diameters between 20mm-35mm.

    Usage and Maintenance for the BC05R V2.0
    - Disassembling the sealed head can cause damage to the light and will void the warranty. - Recharge the light timely when the battery level is critical, for future use. - Recharge a stored light every 3 months to maintain optimal battery performance. - Periodic cleaning improves the light's performance especially when the light flickers, shines intermittently or even fails to illuminate for the following reason:
    A: Poor battery level. Solution: Recharge or replace the battery.




    BC05R V2.0 SIZE
    Length: 2.01" (51mm) Width: 0.87" (22mm) Height: 0.87" (22mm)
    BC05R V2.0 WEIGHT
    0.99 oz. (28g) including battery
    BC05R V2.0 BATTERY TYPE
    Built-in 400mAh li-polymer battery.
    INCLUDED
    Type-C charging cable, bicycle mounting strap, body clip


    Manufacturer Part No:

    FNX-BC05RV2.0
    Brand:

    Fenix

    Product Type:

    Rechargeable Tail Light
    UPC

    -
    Product Family:

    Bicycle LED Light
    Shipping Weight:

    0.02 kg
    PB Part No:

    TOLFNX0069
    Product Model:

    BC05R V2.0



    Warranty:
    24 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like