Home Toys, Hobbies & STEM Plastic Model Kits Military Land Vehicles Modern Recovery Vehicles

Fenix Bicycle LED Light BC25R Rechargeable Front Light Max 600 Lumens, Build-In 2600mAH Li-ion, Battery & MicroUSB Charging Port

FJ $160.92 excl. VAT

Fenix Bicycle LED Light BC25R Rechargeable Front Light Max 600 Lumens, Build-In 2600mAH Li-ion, Battery & MicroUSB Charging Port Bike Head Flashlight & Torch, Battery and USB Charging Cable are Included - 2 Years Free Repair Warranty!

the selected product is not available.

Scooter & Bike Lights

Description

Warning: This light is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone's eyes.
Warranty: 2-Years Free Repair Warranty (Battery included)!

Fenix USB Rechargeable Bicycle Front Light - Silver, MAX 600 Lumens

The Fenix BC25R is a lightweight, bike light specifically built for the urban environment. This light features an innovative cut-off facula line which blocks off the top of the light beam so you won't blind oncoming traffic. Equipped with a neutral white Cree XP-G3 LED for true color rendering and long life, the BC25R blasts 600 lumens 348 feet. Additional features like a one-switch control, micro USB rechargeable, battery level indicator, quick-release light mount, metal heat-dissipating structure, and IP66 rated protection make the BC25R a must-have for your bicycle commute.

Additional Features:
- Anti-glare cut-off facula line makes urban commuting safer for oncoming persons - CREE XP-G3 neutral white LED - max 600 lumens, with a lifespan of 50,000 hours - Built-in 2600mAh Li-ion battery - Micro USB rechargeable - Battery level indication and low-voltage warning - One switch control - Quick-release bike mount, easily operated - Can be used as a flashlight - All-metal heat dissipating fins
Operating Instructions
On/Off: Press and hold the switch for 0.5s to turn the light on/off.
Output Selection: With the light switched on, single click the switch to cycle through Low, Med, High, Turbo.
Flash: With the light switched on, double click the switch to enter flash, single click to turn back to general mode.
Battery level Indication: With the light switched off, single click the switch to check the battery status. The battery level indicators will display the battery status for 3 seconds.
- One light on: critical, 0% - 25% - Two lights on: poor, 26% - 50% - Three lights on: sufficient, 51% - 85% - Four lights on: saturated, 86% - 100%
Charging: One standard Micro USB charging cable, which can be used for charging other digital devices, is included.
Operation: With the light switched off, remove the dust cover of the bicycle light to reveal the charging port, and plug the Micro USB end of the USB cable into the light's charging port, then connect the other end of the USB cable to a USB power adaptor.
Charging Indicator: The indicators near the switch will display charging status. Four indicators will remain constant on when the battery is fully charged.
Note:
- Once charging is completed, be sure to remove the charging cable and replace the dust cover. - The normal charging time of the built-in battery is 2.5 hours from fully depleted to fully charged with the light off. - Recharge the light timely when the battery level is critical, for future use. - Recharge a stored light every three months to maintain optimal battery performance. - Only Low output can be used while the light is being charged, but charging time will be prolonged.
Intelligent Memory Circuit:The light memorizes the last selected brightness level on General mode. When turned on again the previously used brightness level will be recalled.
Overheat Protection: The light will accumulate a lot of heat when working on Turbo mode. The light will automatically step down a few lumens to reduce the temperature, but turbo mode can be reselected.
Low-voltage Warning: One of the indicators flashes when the battery level is critical. When the voltage level drops below a preset level, the bicycle light is programmed to step down to a lower brightness level until Low output is reached. To ensure normal use, the bicycle light will work until the battery runs out.
Mounting Instruction
Bicycle Light and bicycle mount
- Unscrew the screw of the bike mount. Fix the bike mount in the desired position on the bike handlebar and fasten the screw. - Loosen the fine adjustment screw of the handlebar mount before clamping the mount to the bar by securely tightening the set screw. - Slide the light into the mount until a distinct "click" is heard.
Note:
1.Adjust the direction of the light before testing the power and functions of the bicycle light. 2.Use the shims provided according to the diameter of the bicycle's handlebars: - Thick + thin shims together: diameter 22-28mm; - Thin only: diameter 28-32mm); - With no shim (whenever applicable): diameter 32-35mm.
Usage and Maintenance
- Disassembling the sealed head can cause damage to the light and will void the warranty. - The light will accumulate a lot of heat when working on Turbo mode. - Do not touch the heat dissipation fins. - For secure transportation, the bicycle light is not fully charged before delivery. Recharge it before first use. - Store a fully charged light in a dry, ventilated place if it will not be used for a long time. Recharge a stored light before reuse.




Size
Length 113mm Width 32mm Height 31mm Weight 155g
Battery
Built-in 2600mAh Li-ion Battery Waterproof IP66
Output Lumen Levels
50 150 350 600 150 (Flash)
Runtime
Low 36 Hours Medium 15 Hours High 7 Hours Turbo 2 Hours


Manufacturer Part No:

FNX-BC25R
Brand:

Fenix

Product Type:

Rechargeable Front Light
UPC

-
Product Family:

Bicycle LED Light
Shipping Weight:

0.25 kg
PB Part No:

TOLFNX0002
Product Model:

BC25R



Warranty:
24 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like