Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Health, Fitness & Outdoors Scooters & Accessories Go Karts

    MOXA Universal Controller ioLogik E1242 Universal I/O, 4 AIs, 4 DIs, 4 DIOs, -10 to 60°C operating temperature

    FJ $1,172.61 excl. VAT

    MOXA Universal Controller ioLogik E1242 Universal I/O, 4 AIs, 4 DIs, 4 DIOs, -10 to 60°C operating temperature

    the selected product is not available.

    Controllers & I/Os

    Description

    The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.
    Daisy-Chained Ethernet I/O Connection
    This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.
    - User-definable Modbus TCP Slave addressing - Supports RESTful API for IIoT applications - Supports EtherNet/IP Adapter - 2-port Ethernet switch for daisy-chain topologies - Saves time and wiring costs with peer-to-peer communications - Active communication with MX-AOPC UA Server - Supports SNMP v1/v2c - Easy mass deployment and configuration with ioSearch utility - Friendly configuration via web browser - Simplifies I/O management with MXIO library for Windows or Linux - Class I Division 2, ATEX Zone 2 certification - Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments




    Input/Output Interface
    Digital Input Channels
    4
    Configurable DIO Channels (by jumper)
    4
    Analog Input Channels
    4
    Isolation
    3k VDC or 2k Vrms
    Buttons
    Reset button
    Digital Inputs
    Connector
    Screw-fastened Euroblock terminal
    Sensor Type
    Dry contact Wet contact (NPN or PNP)
    I/O Mode
    DI or event counter
    Dry Contact
    On: short to GND Off: open
    Wet Contact (DI to COM)
    On: 10 to 30 VDC Off: 0 to 3 VDC
    Counter Frequency
    250 Hz
    Digital Filtering Time Interval
    Software configurable
    Points per COM
    4 channels
    Digital Outputs
    Connector
    Screw-fastened Euroblock terminal
    I/O Type
    Sink
    I/O Mode
    DO or pulse output
    Current Rating
    200 mA per channel
    Pulse Output Frequency
    500 Hz (max.)
    Over-Current Protection
    2.6 A per channel @ 25°C
    Over-Temperature Shutdown
    175°C (typical), 150°C (min.)
    Over-Voltage Protection
    35 VDC
    Analog Inputs
    Connector
    Screw-fastened Euroblock terminal
    I/O Mode
    Voltage/Current
    I/O Type
    Differential
    Resolution
    16 bits
    Input Range
    0 to 10 VDC 0 to 20 mA 4 to 20 mA 4 to 20 mA (with burn-out detection)
    Accuracy
    ±0.1% FSR @ 25°C ±0.3% FSR @ -10 to 60°C
    Sampling Rate
    12 samples/sec per module (shared between up to 4 channels)
    Built-in Resistor for Current Input
    120 ohms
    Input Impedance
    10 mega-ohms (min.)
    Ethernet Interface
    10/100BaseT(X) Ports (RJ45 connector)
    2, 1 MAC address (Ethernet bypass)
    Magnetic Isolation Protection
    1.5 kV (built-in)
    Ethernet Software Features
    Configuration Options
    Web Console (HTTP), Windows Utility (ioSearch), MCC Tool
    Industrial Protocols
    Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, EtherNet/IP Adapter
    Management
    RESTful API, SNMPv1/v2c, SNMPv1 Trap, HTTP, DHCP Client, BOOTP, IPv4, TCP/IP, UDP
    MIB
    Device Settings MIB
    Security
    Access control list
    Security Functions
    Authentication
    Local database
    LED Interface
    LED Indicators
    Power, Ready, Port 1, Port 2
    Modbus TCP
    Functions Supported
    1, 2, 3, 4, 5, 6, 15, 16, 23
    Mode
    Server (Slave)
    Max. No. of Client Connections
    10
    EtherNet/IP
    Mode
    Adapter
    Max. No. of Scanner Connections
    9 (for read-only), 1 (for read/write)
    Power Parameters
    Power Connector
    Screw-fastened Euroblock terminal
    No. of Power Inputs
    1
    Input Voltage
    12 to 36 VDC
    Power Consumption
    139 mA @ 24 VDC
    Physical Characteristics
    Housing
    Plastic
    Dimensions
    27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
    Weight
    200 g (0.44 lb)
    Installation
    DIN-rail mounting, Wall mounting
    Wiring
    I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG
    Environmental Limits
    Operating Temperature
    -10 to 60°C (14 to 140°F)
    Storage Temperature (package included)
    -40 to 85°C (-40 to 185°F)
    Ambient Relative Humidity
    5 to 95% (non-condensing)
    Altitude
    4000 m


    Manufacturer Part No:

    ioLogik E1242 V1.1.4
    Brand:

    MOXA

    Product Type:

    -
    UPC

    -
    Product Family:

    Universal Controller
    Shipping Weight:

    0.2 kg
    PB Part No:

    IPCMXAIOE120003
    Product Model:

    ioLogik E1242



    Warranty:
    60 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like