Home Phones & Accessories Smart Watches & Fitness Watches

PowerShield Centurion PSCERT1000 RT 1000VA/ 900W Double Conversion True Online UPS. Power Factor 0.9 Rack/Tower Design (2RU) Hot

FJ $1,809.64 excl. VAT

PowerShield Centurion PSCERT1000 RT 1000VA/ 900W Double Conversion True Online UPS. Power Factor 0.9 Rack/Tower Design (2RU) Hot-Swappable Battery. EBM Compatible to Extend Runtime.

the selected product is not available.

UPS - On-Line

Description

POWERSHIELD Centurion RT 1000VA/ 900W Double Conversion True Online UPS. Power Factor 0.9 Rack/Tower Design (2RU) Hot-Swappable Battery. EBM Compatible to Extend Runtime.
The Centurion RT has an energy saving Advanced ECO mode, which allows the unit to operate at very high efficiency, up to 98%. When the utility mains input voltage is within the ECO range the UPS saves energy by passing the mains supply directly through to the load, while the inverter continues to operate in a passive mode.
The Centurion RT incorporates hot-swappable internal battery packs which can be accessed via the front panel for maintenance changes, keeping the UPS operational during battery replacement. Battery backup time can be increased by simply adding additional Battery Banks. The standard Centurion RT has been designed with a larger charger than others ensuring rapid recharge times when adding additional battery banks.
The LCD display panel is readily viewable whether the UPS is horizontal or vertical. The display Menu is simple and intuitive. It displays all critical and noncritical parameters, including the estimated battery backup time remaining. This UPS comes with programmable power management outlets allowing the user to control load segments, thereby extending battery backup times to mission-critical devices by shutting down noncritical items.
The Centurion RT has been meticulously developed by Power Shield engineers to address absolutely all requirements and features as has been demanded by the sophisticated Australian power consumer and hence the Centurion RT stands in a class of its own, as a world-leading UPS technology.

Features

Surge Protection Best in its Class - 984J/22000A
True online double-conversion
Power factor 0.9
Extra large charger for rapid recharging
Option to add additional battery banks to increase backup time
User-friendly, electronic easy-shift LCD display
Rack or Tower design
Advanced ECO mode for energy saving
Generator compatible
Programmable power management outlets
EPO - Emergency Power Off function
Hot-swappable battery design
USB, RS232, SNMP, Modbus, Environmental Monitoring and AS400 multiple communications available








INPUT

Voltage Range
Low Line Transfer
160Vac / 140Vac / 120Vac / 110Vac ± 5% (based on load percentage 100% - 80% / 80% - 70% / 70% - 60% / 60% - 0)

Low Line Comeback
170Vac / 150Vac / 130Vac / 120Vac ± 5%

High Line Transfer
300Vac± 5%

High Line Comeback
290Vac± 5%

Frequency Range
40Hz - 70Hz

Phase
Single phase with ground

Power Factor Correction
>0.99 @ nominal voltage (100% load)


OUTPUT
Output Power Factor: 0.9

Output Voltage (AC Mode)
240Vac (Selectable 208/220/230/240Vac)

Voltage Regulation (Bat. Mode)
±1%

Frequency Range (Batt. Mode)
50Hz or 60Hz±1Hz

Current Crest Ratio
5:1 (max.)

Transfer Time
4ms (Typical)


EFFICIENCY

ECO Mode (Advanced)
98%

Battery Mode
86%


BATTERY

Battery Type & Number
12 V*9AH (x3)

Typical Recharge Time
4 hours recover to 90% capacity

Charging Current (max.)
Standard Model -1.5Amp, Long Run Model - 1Amp/2Amp /4Amp/6Amp (factory default is 6Amp)


PROTECTION

Full Protection
Overload, discharge, thermal, short circuit and overcharge protection

Surge Protection
984 Joules / 22000 Amps


COMMUNICATIONS & MANAGEMENT

Interface
USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact

Software
PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix and Mac

LCD Display/Alarm
UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators

Audible Alarm
Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload


PHYSICAL

Dimension (D x W x H)
480 x 438 x 88 mm

Weight
18kg


OPERATING ENVIRONMENT

Temperature
0 - 40°C

Humidity
20 - 90% (RH Non-condensing)

Noise Level
< 50dBA @ 1 Meter


COMPLIANCE

Safety
EN62040-1-1 2003, IEC60950-1-1

EMC
EN62040-2 2006

RoHS
Directive 2011/65/EU


Manufacturer Part No:

PSCERT1000
Brand:

PowerShield

Product Type:

-
UPC

-
Product Family:

Centurion
Shipping Weight:

18.523 kg
PB Part No:

UPSPSD1001
Product Model:

PSCERT1000



Warranty:
24 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like