Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Health, Fitness & Outdoors Camping & Outdoors Portable Power

    PowerShield Commander RT 1100VA Line Interactive Pure Sine Wave Output. Rack / Tower Design(2RU)Hot-Swappable Batteries, NZ + IE

    FJ $1,423.24 excl. VAT

    PowerShield Commander RT 1100VA Line Interactive Pure Sine Wave Output. Rack / Tower Design(2RU)Hot-Swappable Batteries, NZ + IEC Outputs, Leading Surge Protection Multiple Communication Options.

    the selected product is not available.

    UPS - Line Interactive

    Description

    PowerShield COMMANDER RT
    With pure sine wave output, the Commander Rackmount Tower guarantees compatibility for all kinds of loads. It's perfect power protection for versatile applications such as networking, telecom and other mission-critical applications. The ECO mode function allows cost-effective operation of UPS Systems as high as 98%. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems. To provide longer backup time the 2kVA and 3kVA models are expandable to include an additional battery bank.
    - Pure sine wave output - Rack/Tower design - Built-in boost and buck AVR - Output power factor 0.8 - Programmable power management outlets - ECO mode operation for energy saving (ECO) - Emergency Power Off Function (EPO) - Hot-swappable battery design - Long-run models available - Multiple communication available




    Model PSCRT1100
    Capacity 100VA / 880W
    Topology Line interactive, Pure Sine Wave
    Input
    Voltage 240V ac (Nominal)
    Voltage Range 162 -290V ac
    Frequency Range 50 / 60Hz +- 5Hz (Auto sensing)
    Output
    Output Voltage (AC Mode) 240Vac (Selectable 208/220/230Vac) ±10% AVR
    Voltage Regulation (Batt. Mode) ±3%
    Frequency Range (Batt. Mode) 50Hz or 60Hz ±1Hz
    Current Crest Ratio 3:1
    Transfer time 6ms (Typical)
    Waveform (Batt. Mode) Pure Sine Wave
    Efficiency
    ECO Mode (advanced) 98%
    Battery Mode 83%
    Battery
    Battery Type & Number 12 V * 9AH (x 2)
    Typical recharge time 4 hours recover to 90% capacity
    Protection
    Full protection Overloadd, discharge, thermal, short circuit and overcharge protection
    Surge protection 1560 joules / 32500 Amps
    Communications & management
    Interface USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
    LCD display / alarm AC Mode, Batt.Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Low Batt., Batt.Time Remaining
    Audible Alarm Battery mode, low battery (Batt. mode), Fault, Overload
    Physical
    Dimension (D x W x H) 380 x 438 x 88 mm
    Weight (Net/Gross) 1.5kg / 16kg
    Operating environment
    Temperature 0 - 40 ºC
    Humidity 0-90% (RH Non-condensing)
    Noise level < 45 dB


    Manufacturer Part No:

    PSCRT1100
    Brand:

    PowerShield

    Product Type:

    -
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    1.01 kg
    PB Part No:

    UPSPSD0020
    Product Model:

    -



    Warranty:
    24 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like