Home Toys, Hobbies & STEM Model Accessories

PowerShield PSCERT1000L Centurion RT 1000VA Long Run Online UPS. No Internal

FJ $1,798.37 excl. VAT

PowerShield PSCERT1000L Centurion RT 1000VA Long Run Online UPS. No Internal

the selected product is not available.

UPS - On-Line

Description

POWERSHIELD Centurion RT 1000VA Long Run Online UPS. No Internal Batteries, PSRTBB6 or External battery bank must be used. 8A Internal Charger.
As a true online double conversion UPS the Centurion RT is our highest single phase power density UPS. Boasting an output power factor of 0.9, this will fully protect mission-critical devices as it can support larger loads than UPS products of an equal VA rating.
The Centurion RT has an energy saving Advanced ECO mode, which allows the unit to operate at very high efficiency, up to 98%. When the utility mains input voltage is within the ECO range the UPS saves energy by passing the mains supply directly through to the load, while the inverter continues to operate in a passive mode.
Features:
- True double-conversion - Output power factor 0.9 - User-friendly and electronic easy-shift LCD display - Rack or Tower design - Advanced ECO mode for energy saving - Generator compatible - Programmable power management outlets - Emergency Power Off function (EPO) - Hot-swappable battery design - Ideal for medium density power protection - Extra large charger







PSCERT1000L
RT BATTERY BANKS:PSRTBB12

Capacity
1000VA/900W


Topology
True online double- conversion, Pure Sine Wave


INPUT

Voltage Range
Low Line Transfer
160V/140V/120V/110V AC ±5% (based on load percentage 100%-80%/80%-70%/70%-60%/60%-0)


Low Line Comeback
175V/155V/135V/25V AC ±5%


High Line Transfer
300VAC ±5%


High Line Comeback
290V AC ±5%


Frequency Range
40Hz~ 70Hz


Phase
Single phase with ground


Power Factor Correction
=0.99 @ nominal voltage (100% load)


OUTPUT

Output Power Factor
0.9


Output Voltage (AC Mode)
240VAC (Selectable 200/208/220/230/240V AC)


Voltage Regulation (Batt. Mode)
± 1%


Frequency Range (Batt. Mode)
50Hz or 60Hz ±1Hz


Current Crest Ratio
3:1 (max.)


Transfer
AC Mode to Batt. Mode
4ms (Typical)


Inverter to Bypass
Pure Sine Wave


EFFICIENCY

ECO Mode (Advanced)
96%


Battery Mode
86%


BATTERY

Battery Number (12Vx9AH)
x 3


Typical Recharge Time
4 hours recover to 90% capacity (for the standard model only)


Charging Current (max.)
Standard Models - 1.5Amp. Long Run Models - 1Amp/2Amp/4Amp/6Amp selectable (factory default is 6Amp)


PROTECTION

Full Protection
Overload, discharge, thermal, short circuit and overcharge protection


Surge Protection
984 Joules/22000A


COMMUNICATIONS AND MANAGEMENT

Interface
USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact


Software
PowerShield® NetGuard® software - supports Windows-based operating systems, Linux, Unix and Mac


LCD Display/Alarm
UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators


Audible Alarm
Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload


PHYSICAL

Dimension, (D x W x H)
380 x 438 x 88mm
480 x 438 x 88mm

Weight
8.4kg
22kg

OPERATING ENVIRONMENT

Temperature
0°C~ 40°C


Humidity
20%~ 90% (RH Non-condensing)


COMPLIANCE

Safety/EMC/RoHS
EN62040-1-1 2003, IEC60950-1-1/EN62040-2 2006/Directive 2011/65/EU



Manufacturer Part No:

PSCERT1000L
Brand:

PowerShield

Product Type:

-
UPC

-
Product Family:

-
Shipping Weight:

13 kg
PB Part No:

UPSPSD3005
Product Model:

PSCERT1000L



Warranty:
24 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like