Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Headphones & Audio Pro Audio & Sound Recording Headphones

    Raspberry Pi 3 Model A+ 64-bit Quad Core 1.4GHz WIFI Dual-Band 2.4G 5G Bluetooth 4.2/BLE

    FJ $80.13 excl. VAT

    Raspberry Pi 3 Model A+ 64-bit Quad Core 1.4GHz WIFI Dual-Band 2.4G 5G Bluetooth 4.2/BLE

    the selected product is not available.

    Development & Expansion Boards

    Description

    NOTE: Due to stock shortages there is now a limit of 2 units per person! Any order which more than 2 units would be cancelled without note!
    SAFETY INSTRUCTIONS
    To avoid malfunction or damage to this product, please observe the following:
    - Do not expose to water or moisture, or place on a conductive surface while in operation. - Do not expose to heat from any source; the Raspberry Pi 3 Model A+ is designed for reliable operation at normal ambient temperatures. - Take care while handling to avoid mechanical or electrical damage to the printed circuit board and connectors. - While it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.
    WARNINGS
    - This product should only be connected to an external power supply rated at 5 V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model A+ shall comply with relevant regulations and standards applicable in the country of intended use. - This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered. - While in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items. - The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty. - All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi. - The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
    Overview
    The Raspberry Pi 3 Model A+ is the latest product in the Raspberry Pi 3 range. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.2/BLE.
    The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.
    The Raspberry Pi 3 Model A+ has the same mechanical footprint as the Raspberry Pi 1 Model A+.
    PRODUCT BRIEF, MECHANICAL DRAWINGS, AND SCHEMATICS
    Raspberry Pi 3 Model A+ product brief Raspberry Pi 3 Model A+ mechanical drawing Raspberry Pi 3 Model A+ schematic diagrams










    Processor
    Broadcom BCM2837B0, Cortex-A53, 64-bit SoC @ 1.4 GHz

    Memory
    512MB LPDDR2 SDRAM

    Connectivity
    2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE

    Access
    Extended 40-pin GPIO header

    Video & sound
    1 × full size HDMI

    MIPI DSI display port

    MIPI CSI camera port

    4 pole stereo output and composite video port

    Multimedia
    H.264, MPEG-4 decode (1080p30);

    H.264 encode (1080p30);

    OpenGL ES 1.1, 2.0 graphics

    SD card support
    Micro SD format for loading operating system and data storage

    Input power
    5 V/2.5 A DC via micro USB connector

    5 V DC via GPIO header

    Environment
    Operating temperature, 0-50°C

    Production lifetime
    The Raspberry Pi 3 Model A+ will remain in production until at least January 2023


    Manufacturer Part No:

    SC0130(J)
    Brand:

    Raspberry Pi

    Product Type:

    -
    UPC

    652508442181
    Product Family:

    3
    Shipping Weight:

    0.061 kg
    PB Part No:

    SEVRBP0150
    Product Model:

    Model A+



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like