Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home More Pet Accessories Pet Food & Water Dispensers Pet Water Bottles

    Raspberry Pi Display 1.14inch LCD Module for Raspberry Pi Pico, 65K Colors, 240 x 135, SPI

    FJ $31.06 excl. VAT

    Raspberry Pi Display 1.14inch LCD Module for Raspberry Pi Pico, 65K Colors, 240 x 135, SPI

    the selected product is not available.

    Other Single Board Accessories

    Description

    NOTE: Raspberry Pi Pico is NOT included. The pictures are for reference ONLY.
    1.14inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 240�135 Pixels, SPI Interface.
    Features:
    - 240�135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect - SPI interface, requires minimal IO pins - 4 x user buttons for easy interacting

    LCD and the controller:
    - The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 135(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller. - This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565. - This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD
    Working Protocol:

    Note: Different from the traditional SPI protocol, the data line from the slave to the master is hidden since the device only has a display requirement.
    - RESX Is the reset pin, it should be low when powering the module and be higher at other times;; - CSX is slave chip select, when CS is low, the chip is enabled. - D/CX is data/command control pin, when DC = 0, write command, when DC = 1, write data - SDA is the data pin for transmitting RGB data, it works as the MOSI pin of SPI interface; - SCL work s the SCLK pins of SPI interface. - SPI communication has data transfer timing, which is combined by CPHA and CPOL. - CPOL determines the level of the serial synchronous clock at an idle state. When CPOL = 0, the level is Low. However, CPOL has little effect on the transmission. - CPHA determines whether data is collected at the first clock edge or at the second clock edge of the serial synchronous clock; when CPHL = 0, data is collected at the first clock edge. - There are 4 SPI communication modes. SPI0 is commonly used, in which CPHL = 0, CPOL = 0.
    User Guides, Resoures, please check HERE




    Operating voltage
    2.6 ~ 5.5V
    Communication Interface
    4-wire SPI
    Display Panel
    IPS
    Driver
    ST7789
    Resolution
    240×135 pixels
    Display size
    24.91 × 14.86mm
    Pixel size
    0.1101 × 0.1035mm
    Dimensions
    52.00 × 25.00mm


    Manufacturer Part No:

    19340
    Brand:

    Raspberry Pi

    Product Type:

    Module
    UPC

    -
    Product Family:

    Display
    Shipping Weight:

    1 kg
    PB Part No:

    SEVRBP0340
    Product Model:

    1.14inch LCD



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like