Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Home Appliances Bathroom & Personal Care Appliances Massagers & Therapy Devices Heat Pads

    RODE VideoMic On-Camera Microphone with Rycote Lyre Suspension System, 9V-Battery-Powered, 3.5mm Mini Plug Foam Windshield Inclu

    FJ $433.09 excl. VAT

    RODE VideoMic On-Camera Microphone with Rycote Lyre Suspension System, 9V-Battery-Powered, 3.5mm Mini Plug Foam Windshield Included, For DSLR Camera

    the selected product is not available.

    Camera Microphones & Accessories

    Description

    The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight, and when mounted on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its supercardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances. The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness. An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9V battery (sold separately). The microphone will run for approximately 100 hours on a single battery.
    Barrel-Canceling Pickup
    The Rode Video Mic functions as a true line+gradient microphone with a supercardioid pattern in the front and a barrel that cancels side audio. The result is maximum pickup of the source in highly ambient and noisy environments.
    Selectable 10 or 20 dB Pad
    When capturing audio in loud environments, the VideoMic offers built-in attenuation. The selectable 10 or 20 dB pad lessens the microphone's sensitivity, allowing it to handle higher SPL levels without sacrificing clarity.
    High-Pass Filter Switch
    A high-pass filter switch eliminates room ambiance and noise below 80 Hz. This results in improved intelligibility while recording around machinery, wind or close proximities.
    Internal Power
    The condenser element is powered with a standard 9V battery for up to 100 hours (approximately).





    Operating Principle
    Line Gradient
    Transducer
    Condenser
    Diaphragm
    0.50" (12.70 mm)
    Polar Pattern
    Supercardioid
    Frequency Range
    40 Hz to 20 kHz
    Equivalent Noise Level
    20 dB A-Weighted
    Maximum SPL
    134 dB SPL 1%
    Impedance
    200 ohms
    Sensitivity
    -38 dB @ 1 kHz, re 1 V/Pa
    Power Requirements
    9 V Battery
    Low-Cut Filter
    Yes @ 80 Hz
    Pad
    Yes, 10 dB Yes, 20 dB
    Output Connectors
    3.5 mm TRS
    Length
    2.56" (65 mm)
    Diameter
    4.02" (102 mm)
    Weight
    6.21 oz (176 g)


    Manufacturer Part No:

    RODVIDEOMICRYC
    Brand:

    RODE

    Product Type:

    On-Camera Microphone
    UPC

    698813002900
    Product Family:

    VideoMic
    Shipping Weight:

    0.398 kg
    PB Part No:

    CAAROD0003
    Product Model:

    -



    Warranty:
    24 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like