Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Toys, Hobbies & STEM Plastic Model Kits

    AAMP RP3-GM11 AMPLIFIED GM 2000 - 2013 CLASS 2 DATA BUS NO SWC

    FJ $233.45 excl. VAT

    AAMP RP3-GM11 AMPLIFIED GM 2000 - 2013 CLASS 2 DATA BUS NO SWC

    the selected product is not available.

    Other Car Audio

    Description

    Pac RP3-GM11 Radio Replacement Interface for Select GM(R) Vehicles (Class II Databus)
    The RP3-GM11 interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.
    Using this interface will retain factory features such as Warning Chimes and BOSE® amplifi er (Standard or Premium) when the original radio is removed. The RP3-GM11 provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake. The RP3-GM11 also provides a secondary output for adding an optional PAC Steering Wheel Control (SWC) retention interface (SWI-RC, SWI-PS, SWI-JACK, SWI-ECL2 or SWI-X). Rear Seat Controls (RSC) if equipped will also be retained with the SWI interface.

    Radio Replacement Interface Compatible with 2000-2013 GMC, Chevrolet, Cadillac, Pontiac, Oldsmobile, Buick, Saturn, Hummer, Saab, Isuzu Without On-Star
    High current 10A accessory output
    Data controlled outputs for connecting to your navigation radio; speed, reverse and E-brake status output wires
    Retains factory installed amplifier
    Data controlled RAP accessory output
    Keeps vehicle data-bus intact for service
    Durable plastic and metal materials
    Important Notes
    -When used in Non-BOSE® applications simply cut off the RCA connectors and connect the remaining wires to the aftermarket radios high level speaker outputs. - For BOSE® systems, the recommended line level input is between 2-4 volts from the aftermarket radio. - RSC buttons that are identical to the SWC will mimic the SWC one for one - To prevent over driven audio when installing the interface into a vehicle with a BOSE® system, and the aftermarket radio does not have low level outputs, then an LOC (part # SOEM-4 or LP3-4) is recommended to match the input voltage or you can create an audio attenuation circuit (see diagram 2 below for audio attenuation wiring). - Use the 4 position selector switch located on the side of the interface to select the best chime output volume for your specific installation.




    Part Number
    RP3-GM11
    Wiring harness function
    Replace Factory Radio


    Manufacturer Part No:

    RP3-GM11
    Brand:

    AAMP

    Product Type:

    -
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    0.5 kg
    PB Part No:

    CARAAM1121
    Product Model:

    -



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like