Description

APC Back-UPS 350, 230V Serial connectivity Provides management of the UPS via a serial port. USB connectivity Provides management of the UPS via a USB port (not available on all models). Protection
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage Manageability Audible alarms Provides notification of changing utility power and UPS power conditions LED status display Quickly understand unit and power status with visual indicators. Availability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Marketing Features Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.






APC Warranty Info
All APC UPS’s have a 3 year warranty however the batteries on these UPS’s are only supported for 2 years. You can check the factory warranty of an APC UPS by following this link: http://www.apc.com/site/support/nz/en/warranty-services







Output
Output power capacity 210Watts / 350VA
Max Configurable Power (Watts) 210Watts / 350VA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 47 - 63 Hz
Output Frequency (not synced) 50/60 Hz +/-1 Hz
Topology Standby
Output Connections (3) IEC 320 C13 (Battery Backup) (1) IEC 320 C13 (selector_surgetitle)
Transfer Time 6ms typical : 10ms maximum Input Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320-C14 inlet
Cord Length 1.83meters
Input voltage range for main operations 180 - 266V
Number of Power Cords 2
Maximum Input Current 7.0A Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 6hour(s)
Replacement Battery RBC2
RBC Quantity 1
Battery Volt-Amp-Hour Capacity 116 Communications & Management
Interface Port(s) Optional Simple Signalling RS232 cable , USB
Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Surge Protection and Filtering
Surge energy rating 310Joules
Data Line Protection Analog phone line for phone/fax/modem/DSL (RJ-45 connector)
Filtering Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449


Manufacturer Part No:

BK350EI
Brand:

APC

Product Type:

-
UPC

731304016342
Product Family:

-
Shipping Weight:

6.55 kg
PB Part No:

UPSAPC1149
Product Model:

BK350EI



Warranty:
36 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like