Home More Car Electronics Battery Chargers

APC SRT3000XLI 3000VA /2700W Online Smart-UPS SRT

FJ $11,151.42 excl. VAT

APC SRT3000XLI 3000VA /2700W Online Smart-UPS SRT

the selected product is not available.

UPS - On-Line

Description

APC Smart-UPS SRT 3000VA 230V
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protectionGreen modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment. Smart-UPS On-Line Features & Benefits Manageability SmartSlotCustomize UPS capabilities with management cards.Network manageableProvides remote power management of the UPS over the network.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial connectivityProvides management of the UPS via a serial port. Availability
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Scalable runtimeAllows additional run time to be quickly added as needed.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced Serviceability
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Disconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS power conditions Adaptability
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment. Marketing Features
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry's most rigorous standards.Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Protection
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Cold-start capableProvides temporary battery power when the utility power is out.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.






APC Warranty Info
All APC UPS’s have a 3 year warranty however the batteries on these UPS’s are only supported for 2 years. You can check the factory warranty of an APC UPS by following this link: http://www.apc.com/site/support/nz/en/warranty-services







Output
Output power capacity
2.7 KWatts / 3.0 kVA
Max Configurable Power (Watts)
2.7 KWatts / 3.0 kVA
Nominal Output Voltage
230V
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Other Output Voltages
220, 240 Load Crest Factor 3 : 1
Topology
Double Conversion Online
Waveform type
Sine wave
Output Connections
(8) IEC 320 C13 (Battery Backup) (2) IEC 320 C19 (Battery Backup)
Bypass
Internal Bypass (Automatic and Manual)
Input
Nominal Input Voltage
230V
Input frequency
40 - 70 Hz (auto sensing)
Input Connections
British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
Cord Length
2.44 meters
Input voltage range for main operations
160 - 275 V
Input voltage adjustable range for mains operation
100 - 275 (half load) V
Number of Power Cords
3
Other Input Voltages
220, 240
Battery
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
3 hour(s)
RBC Quantity
1
Extendable Run Time
1
Battery Volt-Amp-Hour Capacity
505
Interface Port(s)
RJ-45 Serial , Smart-Slot , USB
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Yes
Available SmartSlot™ Interface Quantity
1
Surge energy rating
340 Joules
Maximum Height
43.2 CM
Maximum Width
8.5 CM
Maximum Depth
63.5 CM
Net Weight
31.3 KG
Colour
Black Units
Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95% no %
Operating Elevation
0-3000 meters
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
0 - 95% no %
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
55.0 dBA
Online thermal dissipation
703.0 BTU/hr
Protection Class
IP 20


Manufacturer Part No:

SRT3000XLI
Brand:

APC

Product Type:

-
UPC

731304317678
Product Family:

-
Shipping Weight:

36.74 kg
PB Part No:

UPSAPC83000
Product Model:

-



Warranty:
36 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like