Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Computers & Tablets Refurbished PCs

    Audioengine HD3 Powered Desktop Speakers - Walnut

    FJ $870.99 excl. VAT

    Audioengine HD3 Powered Desktop Speakers - Walnut

    the selected product is not available.

    Bookshelf Speakers

    Description

    The HD3 premium powered speakers are a mini home music system with high-fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your computer, extended-range wireless aptX-HD Bluetooth from your phone, or good old analog from that vintage turntable or 80's Sony tape deck.
    No Missed Connections
    Connect to the HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to the HD3 from just about anywhere in your house (within 100') without dropouts. Wireless setup is designed for simplicity and only takes about a minute. And if you're using the HD3 on your desktop, connect it with a USB cable. The USB input bypasses your computer's built-in headphone jack for an enhanced listening experience. If you're not keen on USB or wireless, you can still use any stereo RCA or 1/8" audio cable to connect.
    Expandability
    The HD3 is expandable, so if you want deeper bass, just connect your subwoofer.
    Plug In Your Headphones
    The HD3 includes a dedicated headphone output on the front panel, so you can listen without waking the neighbors. Its headphone amplifier is designed to deliver quality sound that drives even the most demanding headphones.
    Retro-Forward Design
    The HD3 features aluminum trim accents and detachable magnetic grilles designed to blend with any d�cor.
    Built-In Amplifiers
    Built-in power amplifiers save space and eliminate the need to connect the HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right speaker. All internal components of the HD3 are designed and tuned together for a more uniform sound than traditional separate speakers and amplifier.
    Integrated Design
    The speaker cabinets, drivers, bass port designs, amplifiers, and passive crossovers are all tuned together specifically for the HD3. This is designed to provide for a more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.
    Built-In B1 and D1
    Features from the Audioengine B1 aptX HD Bluetooth receiver and D1 24-bit DAC are combined in the HD3 to help make it a complete digital audio system.
    Bluetooth and aptX HD
    The HD3 is designed to easily connect to any of your devices that have Bluetooth, but for enhanced sound quality, use a device that supports Bluetooth aptX HD. For Apple devices that don't have aptX HD, such as the iPad or iPhone, Apple generally uses the AAC codec. It sounds good as well, and you'll get the extra benefit of the upsampling 24-bit DAC.
    Extended Wireless Range
    Through signal management circuitry and antenna tuning, the HD3 offers a solution that has up to three times the range of standard Bluetooth for multi-room use with no degradation in audio quality.
    24-Bit DAC
    The HD3 Bluetooth receiver and USB input both utilize the PCM 5102 DAC, which is designed for low-noise and high-fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24-bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24-bits - as well as the added benefit of onboard triple-redundancy power source conversion and filtering - the HD3 Bluetooth implementation presents low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.
    HD3 Headphone Amplifier
    The HD3 contains a headphone amplifier based on the OPA2134 low-noise opamp. This amp is designed to provide low-impedance, high-fidelity audio and a 2V output, which can drive a wide range of headphones.
    Amplifier Design
    The amplifiers in the HD3 are located in the left speaker and are a class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration, which is designed to provide quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for enhanced mechanical shock protection.
    Driver Designs
    The HD3 uses ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters are fashioned to hold up well under high power, and the edge-driven design gives a smooth response. The woofers are Kevlar-woven glass-aramid composite with rubber surrounds. Kevlar is designed for strength, so the woofer can retain its shape when being driven at high levels.
    Magnetic Shielding
    The speaker drivers in the HD3s are directly magnetically shielded.




    Speaker System
    Speaker Configuration
    2-Way
    Amplifier Power Rating
    30 W RMS 60 W Peak
    Drivers
    1 x 2.75" / 69.85 mm Woven Aramid-Fiber/Kevlar Woofer (per Speaker) 1 x 0.75" / 19.05 mm Silk Dome Tweeter (per Speaker)
    Enclosure Type
    Bass-Reflex
    Frequency Response
    65 Hz to 22 kHz
    Wired Connectivity
    1 x Stereo RCA Input 1 x 1/8" / 3.5 mm Input 1 x Micro-USB 1 x Stereo RCA Output (Subwoofer) 1 x 1/8" / 3.5 mm Output (Headphone)
    Amplifier Class
    2 x Class-AB
    SNR (Signal-to-Noise Ratio)
    95 dBA
    Input Impedance
    5 Kilohms
    Wireless Connectivity
    Wireless Connection Protocols
    Bluetooth
    Bluetooth
    5.0
    Wireless Range
    30 m
    Supported Audio Codecs
    AAC, SBC, aptX HD
    Power
    AC Input Power
    100 to 240 VAC, 50 / 60 Hz
    Power Consumption
    10 W (Idle) 4 W (Standby)
    Compatibility
    Supported Sample Rates
    Up to 48 kHz / 24-Bit
    Physical
    Placement & Mounting Options
    Tabletop/Bookshelf
    Cabinet Material
    MDF
    Operating Temperature
    24 to 105°F / 0 to 40°C
    Storage Temperature
    -4 to 115°F / -20 to 46°C
    Operating Humidity
    5 to 95%
    Dimensions
    4.2 x 7 x 5.5" / 10.8 x 17.8 x 14 cm (Each)
    Weight
    Left: 4.0 lb / 1.8 kg Right: 3.4 lb / 1.5 kg


    Manufacturer Part No:

    HD3-WAL(115/230V)
    Brand:

    AUDIOENGINE

    Product Type:

    -
    UPC

    852225007032
    Product Family:

    -
    Shipping Weight:

    5 kg
    PB Part No:

    SPKAUE90021895
    Product Model:

    -



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like