Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Cameras & Drones Drones Consumer Drones

    Edison Robot EdSTEM Home Pack EdSTEM Home Pack 2 x Edison Robots and STEM Bundle 1 x EdCreate Kit

    FJ $405.98 excl. VAT

    Edison Robot EdSTEM Home Pack EdSTEM Home Pack 2 x Edison Robots and STEM Bundle 1 x EdCreate Kit

    the selected product is not available.

    Educational Robotics

    Description

    Bundle Kit Includes SEVMED0001Meet Edison Education STEM V2.0 Robot EdPack1 A Cheap Programmable Educational LEGO bricks SEVMED0004Meet Edison EDL001 EdCreate Edison Robot Creators Kit
    Unlock the full potential of Edison, including using IR messaging between robots, sumo wrestling and interactive programmable robotics builds with the EdSTEM Home Pack which includes 2 Edison robots and 1 EdCreate Edison robot creator's kit at a bundle-pack discount, reducing the cost per product in this bundle.
    IMPORTANT NOTE:
    DO NOT PUSH THE MEET EDISON ON GROUND AS NORMAL TOY CAR. IT WILLCAUSE FREE RUNNING WHEEL ISSUE. PLEASE VISIT BOTTOM OF THIS PAGE FOR FREE WHEEL SOLUTIONS.
    New Invention - Meet Edison - the super affordable, programmable robot
    Overview

    Programming:
    Edison is programmed using EdWare, an icon-based graphical programming language. Programs are downloaded to Edison using the EdComm cable. The EdComm cable plugs into the computer's headphone jack and carries a pulsed audio signal to a high-efficiency LED. The LED converts the pulsed audio signal into light that is received by Edison's line tracker phototransistor and loads the program into the processor.
    https://meetedison.com/robot-programming-software/
    Activities
    https://meetedison.com/robot-activities/
    Sensors and inputs:
    Obstacle detection: Infrared using 2 IR LEDs (front left and right) and IR receiver module (doubles as IR receiver) Remote control: IR receiver module (38kHz) Edison can learn IR codes from most standard TV/DVD remote controls Infrared data comms: IR receiver module (double as obstacle detection sensor and IR remote receiver) Line tracker: Red LED and phototransistor (doubles as barcode reader and programming port) Light sensors: 2 phototransistors (front left and right) Sound sensor: Piezo transducer (doubles as sounder)
    Outputs:
    Drive: Differential drive system Infrared data comms: 2 infrared LEDs (double as obstacle detection sensor) Sound: Piezo buzzer (doubles as sound sensor) Lights: 2 red LEDs (Front left and right)
    Processor:
    Freescale 8-bit MC9S08PA8VLC
    Power:
    Battery: 4 x AAA (UM 4)
    Rotomolding Chocolate Eggs with LEGO and Edison

    Getting your class started with the Edison robot is easy with these 10 Robotics Lesson Plans.
    You can use these 10 Robotics Lesson Plans either as they are or as a starting point to develop your own customised Robotics Lesson Plans. The Robotics Lesson Plans begin with the easier programming icons, such as basic movement behaviours and end with the class favourites, such as line tracking and sumo wrestling.
    Students of all ages really enjoy the programming process, problem solving and collaboration involved with these Robotics Lesson Plans.
    You will find that some students will grasp the initial concepts easily and be ready for the next activity. These Robotics Lesson Plans allow for independent learning and transition to the next lesson. As you grow in confidence with Edison and these Robotics Lesson Plans you will develop your own awareness of how best to transition your students from lesson to lesson.
    Download here: Your EdVenture into Robotics 10 Lesson plans
    Download here: Worksheets (36) and Activity sheets (5)
    How to fix free running wheel issue?
    Here's the fix for that free running wheel. It's caused by the little worm gear coming off the motor inside. Easy to fix. You'll need a little hex screwdriver or allen key. -Take the batteries out -Take the screws out on top of the unit -Take the clear plastic cover off, and from there you can access the screws that hold the circuit board in place. -Undo the circuit board screws and take the circuit board out. -Pull the rubber cover away from the DC motor and pull out the motor. Once you have done this, you will see the DC motor doesn't have the worm gear on the end of it. -Find the worm gear and reattach it. You can compare to the other little motor for positioning. -Turn the DC motor and observe the wheel now turns. -Reassemble

    EdCreate The EdCreate Edison robot creator's kit is a 5-in-1 expansion pack construction system. Designed to work with the Edison robot, EdCreate enriches students' STEM education experience through interactive engineering and programming projects. The EdCreate system can be used with Edison robots to complete five EdBuild projects:
    - the EdTank, - the EdDigger, - the EdRoboClaw, - the EdCrane, and - the EdPrinter.
    The EdBuild projects require progressive levels of coding capabilities, making them a perfect addition to the Edison programming and robotics curriculum.
    EdCreate can also be used in a wide range of open-ended engineering, design and programming challenges. Open-ended projects, including the EdCreate EdChallenges, promote creative problem solving and give students opportunities to find STEM applications to real-world scenarios.
    About the EdCreate - Edison robot creator's kit
    The EdCreate Edison robot creator's kit is a construction system consisting of 115 interlocking building blocks, pegs, gears, and other parts. The individual EdCreate pieces are designed with studs and holes which are compatible with Edison robots and any other LEGO brick compatible building system.
    One EdCreate kit can be used to create five different EdBuilds and a range of other engineering and design challenges. The kit can also be expanded with other LEGO brick compatible building system parts. Resources These free, downloadable resources can help you get the most out of EdCreate.
    Teaching Guide The EdCreate teacher's guide complements the EdCreate EdBuilds and EdChallenges, providing teachers and instructors with:
    - supplementary supporting information about the EdBuilds, - activity extension ideas, - programming projects, and - further information on using EdCreate in the classroom environment.
    Download the teacher's guide to EdCreate

    EdBuild - EdTank The EdTank is actually two builds in one: the basic EdTank and the complete EdTank with rubber band cannon.
    The basic EdTank uses one Edison robot which can be programmed to drive forwards, backwards and spin right or left using barcodes and a TV or DVD remote control. The complete EdTank includes a second Edison robot which controls the firing of the rubber band cannon.
    - Difficulty rating: 1 [EdTank (basic)] 2 [EdTank (complete)] - Recommended age: 8+ - Programming skills needed: Barcodes and remote control
    Download the EdTank build instructions

    EdCreate - the Edison robot creator's kit: build, create and invent
    EdBuild - EdDigger The EdDigger is a remote-controlled excavator, or digger, with a scoop that you can drive around (forwards, backwards and spin right or left). The digger scoop of the EdDigger can lift or lower and can carry small objects, such as parts from the EdCreate kit.
    - Difficulty rating: 2 - Recommended age: 8+ - Programming skills needed: Barcodes and remote control
    Download the EdDigger build instructions

    EdCreate - the Edison robot creator's kit: build, create and invent
    EdBuild - EdRoboClaw The EdRoboClaw is a remote-controlled articulated robotic arm. You will be able to drive the EdRoboClaw forwards, backwards and spin it right or left. You will also be able to open and close the claw to pick up and carry an object, such as one of the EdCreate beams.
    - Difficulty rating: 3 - Recommended age: 8+ - Programming skills needed: Barcodes and remote control
    Download the EdRoboClaw build instructions

    EdCreate - the Edison robot creator's kit: build, create and invent
    EdBuild - EdCrane The EdCrane is a remote-controlled crane with a magnetic hook which you can raise and lower. The magnetic hook of the EdCrane can lift or lower small ferrous-metal objects, such as metal paper clips or small screws, as well as the metal peg from the EdCreate kit. The metal peg can be attached to one of the parts from the EdCreate kit, such as a 3-hole beam, and used with the magnetic hook.
    - Difficulty rating: 4 - Recommended age: 10+ - Programming skills needed: Barcodes and remote control AND EdWare OR EdPy
    Download the EdCrane build instructions

    EdCreate - the Edison robot creator's kit: build, create and invent
    EdBuild - EdPrinter The EdPrinter is a pen plotter which is run using two Edison robots programmed using EdPy. By attaching a writing utensil, such as a felt-tip pen, inserting paper into the base of the EdPrinter, and using a set of basic functions in EdPy, the EdPrinter can be programmed to create a range of different shapes.
    - Difficulty rating: 5 - Recommended age: 12+ - Programming skills needed: EdPy
    Download the EdPrinter build instructions

    EdCreate - the Edison robot creator's kit: build, create and invent
    EdCreate EdChallenges Spark your student's imaginations! These free-form challenges are open-ended engineering design projects perfect for getting students to think creatively, be resourceful and inventive. The EdCreate EdChallenges are designed to encourage creative problem solving, exploration, and the tangible application of learned skills.
    All of the EdCreate EdChallenges require the use of an Edison robot. Any of the components included in the EdCreate creator's kit, as well as additional Edison robots and any other materials selected by students, may also be used.
    Download the EdCreate EdChallenges set
    EdCreate resources - complete set
    The complete set of EdCreate resources contains the following PDFs:
    - instructions for all 5 EdBuilds, - the EdCreate teacher's guide, and - the EdCreate EdChallenges.
    Download the complete set of EdCreate resources




    Manufacturer
    Edison
    Product No.
    SEVMED0992
    Colour
    Orange


    Manufacturer Part No:

    SEVMED0992
    Brand:

    Edison

    Product Type:

    STEM Bundle
    UPC

    -
    Product Family:

    Robot
    Shipping Weight:

    0.166 kg
    PB Part No:

    SEVMED0992
    Product Model:

    EdSTEM Home Pack



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like