Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Phones & Accessories Mobile Phone Screen Protectors Xiaomi Screen Protectors Redmi Note 12 Screen Protectors

    MOXA Industrial converter ICF-1150-S-SC Industrial RS-232/422/485 to single-mode fiber converter, SC connector, 0 to 60°C opera

    FJ $698.29 excl. VAT

    MOXA Industrial converter ICF-1150-S-SC Industrial RS-232/422/485 to single-mode fiber converter, SC connector, 0 to 60°C operating temp.

    the selected product is not available.

    Converters

    Description

    The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When and ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.
    Three-Way Communication
    The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer's serial port to the RS-485 bus.
    Rotary Switch for Setting the Pull High/Low Resistor
    The RS-485 interface supports multidrop or daisy-chain connections, which system engineers will use to connect serial devices such as meters,RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.




    No. of Ports
    2
    Serial Standards
    RS-232, RS-422, RS-485
    Baudrate
    50 bps to 921.6 kbps (supports non-standard baudrates)
    Flow Control
    ADDC® (automatic data direction control) for RS-485
    Isolation
    2 kV (I models)
    Optical Fiber
    100BaseFX ports: ICF-1150/1150I-M/S-SC Series: multi-mode/single-mode SC connector ICF-1150/1150I-M/S-ST Series: multi-mode/single-mode ST connector
    Pull High/Low Resistor for RS-485
    150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm,770 ohm, 500 ohm, 485 ohm
    RS-485 Data Direction Control
    ADDC® (automatic data direction control)
    Terminator for RS-485
    N/A, 120 ohms, 120 kilo-ohms
    Serial Signals
    RS-232
    TxD, RxD, GND
    RS-422
    Tx+, Tx-, Rx+, Rx-, GND
    RS-485-4w
    Tx+, Tx-, Rx+, Rx-, GND
    RS-485-2w
    Data+, Data-, GND
    Power Parameters
    Input Current
    ICF-1150 Series: 127 mA @ 12 VDC ICF-1150I Series: 163 mA @ 12 VDC
    Input Voltage
    12 to 48 VDC
    No. of Power Inputs
    1
    Overload Current Protection
    Supported
    Power Connector
    Terminal block
    Power Consumption
    ICF-1150 Series: 163 mA @ 12 VDC ICF-1150I Series: 127 mA @ 12 VDC
    Physical Characteristics
    Housing
    Metal
    IP Rating
    IP30
    Dimensions
    30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
    Weight
    330 g (0.73 lb)
    Installation
    DIN-rail mounting
    Environmental Limits
    Operating Temperature
    Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F)
    Storage Temperature (package included)
    -40 to 85°C (-40 to 185°F)
    Ambient Relative Humidity
    5 to 95% (non-condensing)


    Manufacturer Part No:

    ICF-1150-S-SC V1.2.0
    Brand:

    MOXA

    Product Type:

    -
    UPC

    -
    Product Family:

    Industrial converter
    Shipping Weight:

    0.4 kg
    PB Part No:

    IPCMXAICF115017
    Product Model:

    ICF-1150-S-SC



    Warranty:
    60 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like