Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Toys, Hobbies & STEM Books & Guides

    MOXA Universal Controller ioLogik E1212 Universal I/O, 8 DIs, 8 DIOs, -10 to 60 C Operating Temperature,

    FJ $642.08 excl. VAT

    MOXA Universal Controller ioLogik E1212 Universal I/O, 8 DIs, 8 DIOs, -10 to 60 C Operating Temperature,

    the selected product is not available.

    Controllers & I/Os

    Description

    Introduction
    The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.
    Daisy-Chained Ethernet I/O Connection
    This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.


    Save Time and Wiring Costs with Peer-to-Peer Communications
    In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik Series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs.


    User-Definable Modbus TCP Addressing for Painless Upgrading of Existing Systems
    For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying initial configurations. Users need to locate each device's networking details, such as I/O channels or vendor-defined addresses, to enable the initial or start address of a SCADA system or PLC. Devices that support user-definable Modbus TCP addressing offer greater flexibility and easier setup. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.


    Push Technology for Events
    When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.





    Input/Output Interface
    Configurable DIO Channels (by jumper)
    8
    Digital Input Channels
    8
    Isolation
    3k VDC or 2k Vrms
    Buttons
    Reset button
    Digital Inputs
    Connector
    Screw-fastened Euroblock terminal
    Counter Frequency
    250 Hz
    Digital Filtering Time Interval
    Software configurable
    Dry Contact
    On: short to GND Off: open
    I/O Mode
    DI or event counter
    Points per COM
    8 channels
    Sensor Type
    Dry contact Wet contact (NPN or PNP)
    Wet Contact (DI to COM)
    On: 10 to 30 VDC Off: 0 to 3 VDC
    Digital Outputs
    Connector
    Screw-fastened Euroblock terminal
    Current Rating
    200 mA per channel
    I/O Mode
    DO or pulse output
    I/O Type
    Sink
    Over-Current Protection
    2.6 A per channel @ 25°C
    Over-Temperature Shutdown
    175°C (typical), 150°C (min.)
    Over-Voltage Protection
    35 VDC
    Pulse Output Frequency
    500 Hz (max.)
    Ethernet Interface
    10/100BaseT(X) Ports (RJ45 connector)
    2, 1 MAC address (Ethernet bypass)
    Magnetic Isolation Protection
    1.5 kV (built-in)
    Ethernet Software Features
    Configuration Options
    Web Console (HTTP), Windows Utility (ioSearch)
    Industrial Protocols
    EtherNet/IP Adapter, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library
    Management
    BOOTP, RESTful API, DHCP Client, HTTP, IPv4, TCP/IP, UDP, SNMPv1 Trap, SNMPv1/v2c
    MIB
    Device Settings MIB
    Security
    Access control list
    LED Interface
    LED Indicators
    Power, Ready, Port 1, Port 2
    Modbus TCP
    Functions Supported
    1, 2, 3, 4, 5, 6, 15, 16, 23
    Mode
    Server (Slave)
    Max. No. of Client Connections
    10
    EtherNet/IP
    Mode
    Adapter
    Max. No. of Scanner Connections
    9 (for read-only), 1 (for read/write)
    Power Parameters
    Power Connector
    Screw-fastened Euroblock terminal
    No. of Power Inputs
    1
    Input Voltage
    12 to 36 VDC
    Power Consumption
    155 mA @ 24 VDC
    Physical Characteristics
    Housing
    Plastic
    Dimensions
    27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
    Weight
    200 g (0.44 lb)
    Installation
    DIN-rail mounting, Wall mounting
    Wiring
    I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG
    Environmental Limits
    Operating Temperature
    -10 to 60°C (14 to 140°F)
    Storage Temperature (package included)
    -40 to 85°C (-40 to 185°F)
    Ambient Relative Humidity
    5 to 95% (non-condensing)
    Altitude
    4000 m
    Standards and Certifications
    EMC
    EN 55032/24, EN 61000-6-2/-6-4
    EMI
    CISPR 32, FCC Part 15B Class A
    EMS
    IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
    Hazardous Locations
    ATEX, Class I Division 2
    Safety
    UL 508
    Shock
    IEC 60068-2-27
    Freefall
    IEC 60068-2-32
    Vibration
    IEC 60068-2-6
    Declaration
    Green Product
    RoHS, CRoHS, WEEE
    MTBF
    Time
    561,930 hrs
    Standards
    Telcordia SR332


    Manufacturer Part No:

    ioLogik E1212 V1.0.4
    Brand:

    MOXA

    Product Type:

    -
    UPC

    -
    Product Family:

    Universal Controller
    Shipping Weight:

    0.3 kg
    PB Part No:

    IPCMXAIOE120007
    Product Model:

    ioLogik E1212



    Warranty:
    60 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like