Home More Tools Power Tools

Panasonic EY79A2X57 Cordless Hammer Drill & Driver - 18V Lithium Ion - Drill Only

FJ $460.46 excl. VAT

Panasonic EY79A2X57 Cordless Hammer Drill & Driver - 18V Lithium Ion - Drill Only

the selected product is not available.

Power Tools

Description

14.4V/18V Cordless Hammer Drill & Driver
The Panasonic EY79A2X57 14.4V/18V Dual Voltage Cordless Drill & Driver is lightweight and compact, yet powerful. With precision variable speed control/reversible, an 18-stage clutch, optimum rotation speed control plus high power brushless motor. The EY79A2X57 is ready for work with a Panasonic 14.4V or 18V battery. Featuring a handy LED light for user-friendly operation in dark areas, a heavy-duty keyless chuck, and an electric brake for added safety.
- Dual Voltage - 14.4V or 18V - Compact body - length 188mm - Electric brake - Optimum rotation speed control - High-power brushless motor 50.0N.m - Variable speed control / reversible - 18-stage clutch plus drill position - 13mm heavy duty keyless chuck - LED light, electric brake, variable speed control/reversible - Skin only, battery pack & charger not included - Tough Tool IP Rating - General construction, masonry drilling, heating, water & sanitation technicians or Electricians
Extreme Durability
EY79A2X57 is equipped with a new brushless motor which helps make the tool last twice as long compared to tools with brush motors. Its new ultra-hard chuck jaw tips are brazed into each jaw giving extra strength and helping reduce wear. Plus, the new hybrid semi-electronic switch helps eliminate heavy friction to internal parts of the switch and it also allows for smoother operation.
New Brushless Motor - Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor.*Compared with Panasonic conventional brushed motor.
New Ultra Hard Chuck Jaw Tips - We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra 'bite strength' and substantially reduce wear.
New Hybrid Switch - To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part.* Compared with Panasonic conventional switches.
Powerful to the Finish
The new large brushless motor delivers a high-speed and powerful performance. The newly designed control circuit increases stable current flow to the motor by more than 70%* enabling the high-power output to be evenly maintained until the task has been completed, even during high-load operation. *Compared with previous brushless motor.
Increased Efficiency and Flexibility
The new "speed control function" lets you to choose from three different low rotation speed settings (high, medium and slow) based on allowable maximum speeds for metal hole saws. It greatly reduces 'run out' when using metal hole saws and prevents surface scorching on stainless steel and other materials.
New Advanced Speed Control
New advanced speed control electronics start rotation speed gradually. This enables slow and smooth starts allowing for ultimate control when you start drilling or working with small screws in precise applications.
Tough Tools for Tough Conditions
Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
Dust and Water - Resistant Level IP56
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected LEVEL 6 - Protected Against Powerful Water Jets
Performance Protection
Switch - An additional rubber cap seals the switch and protects it against dust and water. Electronics - The electronic circuits of control panel and battery pack are covered by an Urethan layer for maximum dust and water protection. Battery - The battery cells are designed to avoid intrusion of moisture.
Dual Voltage for Better Versatility
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
18V 3.0Ah With the 18V 3.0Ah battery, the application speed and working capacity goes up.
14.4V 4.2Ah With the 14.4V 4.2Ah battery, it's easier to use with light weight and compactness.
18V 5.0Ah With the 18V 5.0Ah battery, the application speed and working capacity goes up with increased power.
Powerful and Longer Lasting
Whether it's Panasonic's new generation 18V 5.0Ah battery cell, a slim and lightweight 18V 3.0Ah battery, or a compact standard 14.4V 4.2Ah battery - they all offer more durability during high workload conditions due to its reduction in internal resistance.
Durable New Design
Over-discharge prevention sensor Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage Each cell monitored by sensor to ensure optimal discharge control.
Battery sensor Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
NNP technology Panasonic's own developed Nickel oxide material provides higher capacity and higher reliability.




Max. Torque
Stalling Torque
High/Hard Mode:14.4V : 10Nm / 18V : 12Nm Low/Soft Mode: 14.4V : 28Nm / 18V : 32Nm
Instant Torque
Low/Soft Mode: 14.4V : 40Nm / 18V : 50Nm
Speed at No Load
High/Hard Mode
14.4V : 70-1350rpm / 18V : 70-1580rpm
Low/Soft Mode
14.4V : 30-400rpm / 18V : 30-470rpm
Blows Rate per Minute
High/Hard Mode
14.4V : 1260-24300bpm / 18V : 1260-28400bpm
Low/Soft Mode
14.4V : 540-7200bpm / 18V : 540-8500bpm
Clutch Torque
Clutch Torque
1.0-4.4Nm
Max.Drill Diameter
Low/Soft Mode
In Wood - 14.4V : dia.35mm / 18V : dia.38mm
Low/Soft Mode
In Metal - 14.4V : dia.13mm / 18V : dia.13mm
Max.Screws Driving
Low/Soft Mode
In Wood screw - 14.4V : dia.6.8mm / 18V : dia.8mm
Low/Soft Mode
In Self-drilling screw - 14.4V : dia.6mm / 18V : dia.6mm
Size (LxHxW) / Weight (including battery pack)
LJ2G
188mm x 250mm x 68mm / 2.10kg
PN2G
188mm x 234mm x 68mm / 1.85kg
LS2F
188mm x 242mm x 68mm / 1.95kg
Battery Pack and Charging time (using EY0L82B)
LJ2G
18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min.
PN2G
18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min.
LS2F
14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min.
Capacity
LJ2G
Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1750pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 430pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 1250pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm), 60pcs - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 50pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 75pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 140pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 280pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 220pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 160pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 260pcs
PN2G
Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1050pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 260pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 740pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm), 35pcs - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 30pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 45pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 80pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 170pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 130pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 100pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 150pcs
LS2F
Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1600pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 300pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 830pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 35pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 50pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 110pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 180pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 130pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 110pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 200pcs


Manufacturer Part No:

EY79A2X57
Brand:

Panasonic

Product Type:

Cordless Hammer Drill
UPC

-
Product Family:

-
Shipping Weight:

2.13 kg
PB Part No:

TOLPAN1005
Product Model:

EY79A2X57



Warranty:
12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like