Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Toys, Hobbies & STEM Gundam

    Panasonic EY79A2X57 Cordless Hammer Drill & Driver - 18V Lithium Ion - Drill Only

    FJ $460.46 excl. VAT

    Panasonic EY79A2X57 Cordless Hammer Drill & Driver - 18V Lithium Ion - Drill Only

    the selected product is not available.

    Power Tools

    Description

    14.4V/18V Cordless Hammer Drill & Driver
    The Panasonic EY79A2X57 14.4V/18V Dual Voltage Cordless Drill & Driver is lightweight and compact, yet powerful. With precision variable speed control/reversible, an 18-stage clutch, optimum rotation speed control plus high power brushless motor. The EY79A2X57 is ready for work with a Panasonic 14.4V or 18V battery. Featuring a handy LED light for user-friendly operation in dark areas, a heavy-duty keyless chuck, and an electric brake for added safety.
    - Dual Voltage - 14.4V or 18V - Compact body - length 188mm - Electric brake - Optimum rotation speed control - High-power brushless motor 50.0N.m - Variable speed control / reversible - 18-stage clutch plus drill position - 13mm heavy duty keyless chuck - LED light, electric brake, variable speed control/reversible - Skin only, battery pack & charger not included - Tough Tool IP Rating - General construction, masonry drilling, heating, water & sanitation technicians or Electricians
    Extreme Durability
    EY79A2X57 is equipped with a new brushless motor which helps make the tool last twice as long compared to tools with brush motors. Its new ultra-hard chuck jaw tips are brazed into each jaw giving extra strength and helping reduce wear. Plus, the new hybrid semi-electronic switch helps eliminate heavy friction to internal parts of the switch and it also allows for smoother operation.
    New Brushless Motor - Without brushes and commutator which can reduce the lifetime of the tool, the motor lasts approximately twice compared with brushed motor.*Compared with Panasonic conventional brushed motor.
    New Ultra Hard Chuck Jaw Tips - We increased durability of every part right down to the new metal chuck which features tungsten carbide jaw tips. These extra hardened inserts are brazed into each jaw to give extra 'bite strength' and substantially reduce wear.
    New Hybrid Switch - To eliminate heavy friction to internal parts of the switch during use of electric brake, we developed a new semi-electronic switch. This gives smoother operation and double* the life expectancy of the part.* Compared with Panasonic conventional switches.
    Powerful to the Finish
    The new large brushless motor delivers a high-speed and powerful performance. The newly designed control circuit increases stable current flow to the motor by more than 70%* enabling the high-power output to be evenly maintained until the task has been completed, even during high-load operation. *Compared with previous brushless motor.
    Increased Efficiency and Flexibility
    The new "speed control function" lets you to choose from three different low rotation speed settings (high, medium and slow) based on allowable maximum speeds for metal hole saws. It greatly reduces 'run out' when using metal hole saws and prevents surface scorching on stainless steel and other materials.
    New Advanced Speed Control
    New advanced speed control electronics start rotation speed gradually. This enables slow and smooth starts allowing for ultimate control when you start drilling or working with small screws in precise applications.
    Tough Tools for Tough Conditions
    Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
    Dust and Water - Resistant Level IP56
    The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
    LEVEL 5 - Dust Protected LEVEL 6 - Protected Against Powerful Water Jets
    Performance Protection
    Switch - An additional rubber cap seals the switch and protects it against dust and water. Electronics - The electronic circuits of control panel and battery pack are covered by an Urethan layer for maximum dust and water protection. Battery - The battery cells are designed to avoid intrusion of moisture.
    Dual Voltage for Better Versatility
    Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
    18V 3.0Ah With the 18V 3.0Ah battery, the application speed and working capacity goes up.
    14.4V 4.2Ah With the 14.4V 4.2Ah battery, it's easier to use with light weight and compactness.
    18V 5.0Ah With the 18V 5.0Ah battery, the application speed and working capacity goes up with increased power.
    Powerful and Longer Lasting
    Whether it's Panasonic's new generation 18V 5.0Ah battery cell, a slim and lightweight 18V 3.0Ah battery, or a compact standard 14.4V 4.2Ah battery - they all offer more durability during high workload conditions due to its reduction in internal resistance.
    Durable New Design
    Over-discharge prevention sensor Prevents over-discharge to avoid lasting cell damage or recharge problems.
    Battery overheat protection sensor Cuts off power to the motor before the battery temperature rises.
    Individual monitoring of battery cell voltage Each cell monitored by sensor to ensure optimal discharge control.
    Battery sensor Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
    Heat resistance layer technology In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
    NNP technology Panasonic's own developed Nickel oxide material provides higher capacity and higher reliability.




    Max. Torque
    Stalling Torque
    High/Hard Mode:14.4V : 10Nm / 18V : 12Nm Low/Soft Mode: 14.4V : 28Nm / 18V : 32Nm
    Instant Torque
    Low/Soft Mode: 14.4V : 40Nm / 18V : 50Nm
    Speed at No Load
    High/Hard Mode
    14.4V : 70-1350rpm / 18V : 70-1580rpm
    Low/Soft Mode
    14.4V : 30-400rpm / 18V : 30-470rpm
    Blows Rate per Minute
    High/Hard Mode
    14.4V : 1260-24300bpm / 18V : 1260-28400bpm
    Low/Soft Mode
    14.4V : 540-7200bpm / 18V : 540-8500bpm
    Clutch Torque
    Clutch Torque
    1.0-4.4Nm
    Max.Drill Diameter
    Low/Soft Mode
    In Wood - 14.4V : dia.35mm / 18V : dia.38mm
    Low/Soft Mode
    In Metal - 14.4V : dia.13mm / 18V : dia.13mm
    Max.Screws Driving
    Low/Soft Mode
    In Wood screw - 14.4V : dia.6.8mm / 18V : dia.8mm
    Low/Soft Mode
    In Self-drilling screw - 14.4V : dia.6mm / 18V : dia.6mm
    Size (LxHxW) / Weight (including battery pack)
    LJ2G
    188mm x 250mm x 68mm / 2.10kg
    PN2G
    188mm x 234mm x 68mm / 1.85kg
    LS2F
    188mm x 242mm x 68mm / 1.95kg
    Battery Pack and Charging time (using EY0L82B)
    LJ2G
    18V / 5.0Ah (EY9L54B) Usable:65min. / Full:80min.
    PN2G
    18V / 3.0Ah (EY9L53B) Usable:45min. / Full:60min.
    LS2F
    14.4V / 4.2Ah (EY9L45B) Usable:50min. / Full:60min.
    Capacity
    LJ2G
    Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1750pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 430pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 1250pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm), 60pcs - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 50pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 75pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 140pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 280pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 220pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 160pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 260pcs
    PN2G
    Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1050pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 260pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 740pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm), 35pcs - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 30pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 45pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 80pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 170pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 130pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 100pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 150pcs
    LS2F
    Screwing - Wood Screws in Yellow pine - High Mode; dia.4.1mm x 25mm, 1600pcs - Wood Screws in Yellow pine - Low Mode; dia.8mm x 80mm, 300pcs - Self-Driling Screws in SPC - High Mode; dia.4mm x 13mm, t=1.6mm, 830pcs Drilling - Holes in Plaster Board + Plywood (Wooding core) - High Mode; dia.50mm, t=24.5mm (Plaster Board t=12.5mm, Plywood t=12.0mm) - Holes in SPC (Hole Saw) - High Mode; dia.21mm, t=1.6mm, 35pcs - Holes in SPC (Hole Saw) - Low Mode; dia.33mm, t=1.6mm, 50pcs - Holes in Yellow Pine - High Mode; dia.18mm x 120mm, 110pcs - Holes in Yellow Pine - Low Mode; dia.30mm x 40mm, 180pcs - Holes in Mortar - High Mode; dia.6.5mm x 30mm, 130pcs - Holes in Mortar - High Mode; dia.10mm x 30mm, 110pcs - Holes in Masonry - High Mode; dia.5mm x 40mm depth, 200pcs


    Manufacturer Part No:

    EY79A2X57
    Brand:

    Panasonic

    Product Type:

    Cordless Hammer Drill
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    2.13 kg
    PB Part No:

    TOLPAN1005
    Product Model:

    EY79A2X57



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like