Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Toys, Hobbies & STEM Wooden Models Wooden Boats

    PowerShield Centurion RT 3000VA Double Conversion True Online UPS. Power Factor 0.9, Rack / Tower

    FJ $3,332.70 excl. VAT

    PowerShield Centurion RT 3000VA Double Conversion True Online UPS. Power Factor 0.9, Rack / Tower

    the selected product is not available.

    UPS - On-Line

    Description

    POWERSHIELD Centurion RT 3000VA/ 2700W Double Conversion True Online UPS. Power Factor 0.9 Rack/Tower Design (2RU) Hot-Swappable Battery. EBM Compatible to Extend Runtime.
    The Centurion RT has an energy saving Advanced ECO mode, which allows the unit to operate at very high efficiency, up to 98%. When the utility mains input voltage is within the ECO range the UPS saves energy by passing the mains supply directly through to the load, while the inverter continues to operate in a passive mode.
    The Centurion RT incorporates hot-swappable internal battery packs which can be accessed via the front panel for maintenance changes, keeping the UPS operational during battery replacement. Battery backup time can be increased by simply adding additional Battery Banks. The standard Centurion RT has been designed with a larger charger than others ensuring rapid recharge times when adding additional battery banks.
    The LCD display panel is readily viewable whether the UPS is horizontal or vertical. The display Menu is simple and intuitive. It displays all critical and noncritical parameters, including the estimated battery backup time remaining. This UPS comes with programmable power management outlets allowing the user to control load segments, thereby extending battery backup times tomission-critical devices by shutting down noncritical items.

    Features

    Surge Protection Best in its class - 984 Joules / 22000 AMPS
    True online double-conversion
    Power Factor 0.9
    Extra large charger for rapid recharging
    Option to add additional battery banks to increase backup time
    User-friendly, electronic easy-shift LCD display
    Rack or Tower design
    Advanced ECO mode for energy saving
    Generator compatible
    Programmable power management outlets
    EPO - Emergency Power Off function
    Hot-swappable battery design
    USB, RS232, SNMP, Modbus, Environmental Monitoring and AS400 multiple communications available




    Input
    Voltage Range Low Line Transfer
    160Vac / 140Vac / 120Vac / 110Vac ± 5% (based on load percentage 100% - 80% / 80% - 70% / 70% - 60% / 60% - 0)
    Voltage Range Low Line Comeback
    170Vac / 150Vac / 130Vac / 120Vac ± 5%
    Voltage Range High Line Transfer
    300Vac ± 5%
    Voltage Range High Line Comeback
    290Vac ± 5%
    Frequency Range
    40Hz - 70Hz
    Phase
    Single phase with ground
    Power Factor Correction
    >0.99 @ nominal voltage (100% load)
    Output
    Output Power Factor
    0.9
    Output Voltage (AC Mode)
    240Vac (Selectable 208/220/230/240Vac)
    Voltage Regulation (Batt. Mode)
    ±1%
    Frequency Range (Batt. Mode)
    50Hz or 60Hz ±1Hz
    Current Crest Ratio
    5:1 (max.)
    Transfer Time
    4ms (Typical)
    Efficiency
    ECO Mode (Advanced)
    98%
    Battery Mode
    87%
    Battery
    Battery Type & Number
    12 V*9AH (x6)
    Typical Recharge Time
    4 hours recover to 90% capacity.
    Charging Current (max.)
    Standard Model -1.5Amp, Long Run Model - 1Amp/2Amp /4Amp/6Amp (factory default is 6Amp)
    Protection
    Full Protection
    Overload, discharge, thermal, short circuit and overcharge protection
    Surge Protection
    984 Joules / 22000 Amps
    Communications & Management
    Interface
    USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
    Software
    PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix and Mac
    LCD Display / Alarm
    UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
    Audible Alarm
    Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
    Physical
    Dimension (D x W x H)
    600 x 438 x 88 mm
    Weight
    29.6kg
    Operating Environment
    Tempertature
    0 - 40°C
    Humidity
    20 - 90% (RH Non-Condensing)
    Noise Level
    < 50dBA @ 1 Meter
    Compliance
    Safety
    EN62040-1-1 2003, IEC60950-1-1
    EMC
    EN62040-2 2006
    RoHS
    Directive 2011/65/EU


    Manufacturer Part No:

    PSCERT3000
    Brand:

    PowerShield

    Product Type:

    -
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    33.8 kg
    PB Part No:

    UPSPSD3001
    Product Model:

    -



    Warranty:
    24 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like