Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Description

    POWERSHIELD Centurion RT 1000VA Long Run Online UPS. No Internal Batteries, PSRTBB6 or External battery bank must be used. 8A Internal Charger.
    As a true online double conversion UPS the Centurion RT is our highest single phase power density UPS. Boasting an output power factor of 0.9, this will fully protect mission-critical devices as it can support larger loads than UPS products of an equal VA rating.
    The Centurion RT has an energy saving Advanced ECO mode, which allows the unit to operate at very high efficiency, up to 98%. When the utility mains input voltage is within the ECO range the UPS saves energy by passing the mains supply directly through to the load, while the inverter continues to operate in a passive mode.
    Features:
    - True double-conversion - Output power factor 0.9 - User-friendly and electronic easy-shift LCD display - Rack or Tower design - Advanced ECO mode for energy saving - Generator compatible - Programmable power management outlets - Emergency Power Off function (EPO) - Hot-swappable battery design - Ideal for medium density power protection - Extra large charger







    PSCERT1000L
    RT BATTERY BANKS:PSRTBB12

    Capacity
    1000VA/900W


    Topology
    True online double- conversion, Pure Sine Wave


    INPUT

    Voltage Range
    Low Line Transfer
    160V/140V/120V/110V AC ±5% (based on load percentage 100%-80%/80%-70%/70%-60%/60%-0)


    Low Line Comeback
    175V/155V/135V/25V AC ±5%


    High Line Transfer
    300VAC ±5%


    High Line Comeback
    290V AC ±5%


    Frequency Range
    40Hz~ 70Hz


    Phase
    Single phase with ground


    Power Factor Correction
    =0.99 @ nominal voltage (100% load)


    OUTPUT

    Output Power Factor
    0.9


    Output Voltage (AC Mode)
    240VAC (Selectable 200/208/220/230/240V AC)


    Voltage Regulation (Batt. Mode)
    ± 1%


    Frequency Range (Batt. Mode)
    50Hz or 60Hz ±1Hz


    Current Crest Ratio
    3:1 (max.)


    Transfer
    AC Mode to Batt. Mode
    4ms (Typical)


    Inverter to Bypass
    Pure Sine Wave


    EFFICIENCY

    ECO Mode (Advanced)
    96%


    Battery Mode
    86%


    BATTERY

    Battery Number (12Vx9AH)
    x 3


    Typical Recharge Time
    4 hours recover to 90% capacity (for the standard model only)


    Charging Current (max.)
    Standard Models - 1.5Amp. Long Run Models - 1Amp/2Amp/4Amp/6Amp selectable (factory default is 6Amp)


    PROTECTION

    Full Protection
    Overload, discharge, thermal, short circuit and overcharge protection


    Surge Protection
    984 Joules/22000A


    COMMUNICATIONS AND MANAGEMENT

    Interface
    USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact


    Software
    PowerShield® NetGuard® software - supports Windows-based operating systems, Linux, Unix and Mac


    LCD Display/Alarm
    UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators


    Audible Alarm
    Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload


    PHYSICAL

    Dimension, (D x W x H)
    380 x 438 x 88mm
    480 x 438 x 88mm

    Weight
    8.4kg
    22kg

    OPERATING ENVIRONMENT

    Temperature
    0°C~ 40°C


    Humidity
    20%~ 90% (RH Non-condensing)


    COMPLIANCE

    Safety/EMC/RoHS
    EN62040-1-1 2003, IEC60950-1-1/EN62040-2 2006/Directive 2011/65/EU



    Manufacturer Part No:

    PSCERT1000L
    Brand:

    PowerShield

    Product Type:

    -
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    13 kg
    PB Part No:

    UPSPSD3005
    Product Model:

    PSCERT1000L



    Warranty:
    24 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like