Home Printing, Scanning & Office Labels & Receipt Paper

Supermicro 1123US-TN10RT Barebone, Dual AMD EPYC, 32 DIMM, 10x 2.5" Hot-Swap U.2 NVMe, 2x 10G RJ-45, 2x 1000W Redundant Power Su

FJ $5,539.69 excl. VAT

Supermicro 1123US-TN10RT Barebone, Dual AMD EPYC, 32 DIMM, 10x 2.5" Hot-Swap U.2 NVMe, 2x 10G RJ-45, 2x 1000W Redundant Power Supply

the selected product is not available.

Barebone Servers

Description

Key Features
- Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
- 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors)
- 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
Expansion slots:
- 1 PCI-E 3.0 x16 (FH, 9.5"L) slot,
- 1 PCI-E 3.0 x8 (LP) slot
- Integrated IPMI 2.0 + KVM with dedicated LAN
- Software Out of Band License
- key (SFT-OOB-LIC) included
- for OOB BIOS management
- 2x 10GBase-T LAN ports via Intel® X540
Drive Bays:
- 10 hot-swap 2.5" U.2 NVMe drive bays
- 7.1000W Redundant Power Supplies - Titanium Level (96%) (Full redundancy based on configuration and application load)




Motherboard
Model
H11DSU-iN
Processor/Chipset
CPU
Dual AMD EPYC™ 7001/7002* series Processors (* Board revision 2.x required) Socket SP3 Supports CPU cTDP up to 280W**
Cores
Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
System on Chip (SoC)
Note
** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
System Memory
Memory Capacity
32 DIMM slots Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type
DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 Processors)
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
IPMI
Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers
Intel® X540 Controller
VGA
ASPEED AST2500 BMC
Expansion Slots
1U
1 PCI-E 3.0 x16 (FH, 9.5"L) slot 1 PCI-E 3.0 x8 (LP) slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
M.2
1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 via optional cable CBL-SAST-0639 (2240/2260/2280/22110) or 2 Internal M.2 slots via optional cable CBL-SAST-0639 (NVMe 2260 + SATA 2260)
Input / Output
NVMe
10 U.2 NVMe support
LAN
2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB
5 USB 3.0 ports (2 rear + 2 front + 1 Type A)
VGA
2 VGA ports (1 rear, 1 onboard)
Others
1 COM port 2 SATA DOM power connectors TPM 1.2 header
System BIOS
BIOS Type
AMI 128Mb SPI Flash EEPROM
BIOS Features
Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Chassis
Form Factor
1U
Model
CSE-119UTS-R1K02P-N10T
Dimensions and Weight
Height
1.7" (43mm)
Width
17.2" (437mm)
Depth
27.82" (707mm)
Package
8.19" (H) 23.86" (W) 36.14" (D)
Weight
Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 kg)
Front Panel
Buttons
Power On/Off button System Reset button
LEDs
Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Drive Bays
Hot-swap
10 hot-swap 2.5" U.2 NVMe drive bays
System Cooling
Fans
8 heavy-duty PWM fans with optimal fan speed control
Air Shroud
1 Air Shroud
Power Supply
Type
1000W Redundant Power Supplies with PMBus
Total Output Power
800W/1000W
Dimension
(W x H x L) 73.5 x 40 x 203 mm
Input
100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only)
+12V
Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc)
12Vsb
Max: 2.1A / Min: 0A
Output Type
25 Pairs Gold Finger Connector
Certification
Titanium Level96%Titanium Level
PC Health Monitoring
CPU
Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN
Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
LED
CPU / System Overheat LED
Other Features
Chassis Intrusion Detection Chassis Intrusion Header
Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)


Manufacturer Part No:

AS -1123US-TN10RT
Brand:

Supermicro

Product Type:

Barebone,
UPC

-
Product Family:

-
Shipping Weight:

27 kg
PB Part No:

SVRSPM81007
Product Model:

1123US-TN10RT



Warranty:
12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Questions?

In order to assist us in reducing spam, please type the characters you see:

You may also like