Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Computers & Tablets Thin / Zero Clients

    TASCAM DR-60DMKII Portable Recorder Designed for DSLR Filmmakers

    FJ $856.52 excl. VAT

    TASCAM DR-60DMKII Portable Recorder Designed for DSLR Filmmakers

    the selected product is not available.

    Other Audio Accessories

    Description

    The DR-60D MKII is a compact 4-track audio recorder for dedicated use with a digital single-lens reflex (DSLR) or digital single-lens mirrorless (DSLM) camera as a video system. It can be mounted directly to the camera and offers various audio inputs and outputs to allow the recording of high-resolution audio material in parallel to, but separated from the camera and its video data.
    The recorder features Tascam original HDDA microphone preamps which are known for high S/N ratio, low input-referred noise and low distortion. Recordings can be made at 44.1/48/96 kHz, 16/24-bit in WAV or BWF format. In addition to ordinary stereo recording, it is possible to record up to four channels simultaneously which can then be mixed down to a stereo signal. Recording levels can be adjusted independently for inputs 1, 2 and 3-4 and the Dual Recording function allows two files to be recorded in parallel at different levels.
    The DR-60D MKII can output high-quality audio to a DSLR/DSLM camera to be recorded there as a reference track, and a camera input enables convenient monitoring of audio sent from a DSLR camera. Mid-side decoding, slate tone functions (automatic/manual), selectable time delay and other functions for convenient recording are also available.




    General
    Recording media
    SD card (64 MB - 2 GB) SDHC card (4-32 GB)
    Audio file compatibility
    WAV: 44.1/48/96 kHz, 16/24-bit BWF (Broadcast Wave Format): 44.1/48/96kHz, 16/24-bit
    Number of channels
    4 channels (stereo x 2)
    Analogue audio inputs and outputs
    Mic/Line input 1/L, 2/R (switchable phantom power)
    XLR-3-31 6.3-mm standard TRS Jack
    Input switch set to
    MIC or MIC+PHANTOM
    Input impedance
    2 k?
    Phantom Power
    48 V ±4 V (10 mA/channel) or 24 V ±4 V (10 mA/channel)
    Maximum input level
    0 dBu
    Minimum input level
    -72 dBu
    Mic input gain (input level knob at maximum)
    LOW: +11 dB MID: +36 dB HIGH: +52 dB HIGH+PLUS: +64 dB
    Input switch set to
    LINE
    Input impedance
    10 k? or higher
    Nominal input level
    +4 dBu
    Maximum input level
    +24 dBu
    Mic/Line input 3-4 (supports plug-in power)
    3.5-mm stereo mini jack
    Input impedance
    10 k?
    Maximum input level
    +10 dBV
    Minimum input level
    -50 dBV
    Mic input gain (input level knob at maximum)
    LOW: +3 dB HIGH: +26 dB HIGH+PLUS: +38 dB
    CAMERA IN jack
    3.5-mm stereo mini jack
    Input impedance
    10 k?
    Nominal input level
    -10 dBV
    Maximum input level
    +6 dBV
    CAMERA OUT (LOW) jack
    3.5-mm stereo mini jack
    Output impedance
    200 ?
    Nominal output level
    -50 dBV
    Maximum output level
    -30 dBV
    Headphones output
    3.5-mm stereo mini jack
    Maximum output power
    50 mW + 50 mW
    CAMERA OUT (HIGH)/LINE OUT jack
    3.5-mm stereo mini jack
    Output impedance
    200 ?
    Nominal output level
    -10 dBV
    Maximum output level
    +10 dBV
    Other inputs and outputs
    USB
    USB Mini-B Type
    Format
    USB 2.0 HIGH SPEED mass storage class
    REMOTE jack
    2.5-mm TRS jack
    Audio performance
    Frequency response
    20 Hz - 20 kHz, +0.5/-2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA) 20 Hz - 40 kHz, +0.5/-3 dB (LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
    Distortion
    0.02% or less (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
    S/N ratio
    92 dB or more (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
    Equivalent input noise
    -120 dBu or less
    Note for JEITA
    Conforming to JEITA CP-2150
    Computer compatibility
    Windows
    Pentium 300 MHz or faster 128 MB or more memory
    Mac
    Power PC, iMac, G3, G4 266 MHz or faster 64 MB or more memory
    Recommended USB port
    USB 2.0
    Recommended USB host controller
    Intel chipset
    Supported operating systems
    Windows XP, Windows Vista, Windows 7, Windows 8 (including Windows 8.1), Mac OS X 10.2 or later
    Power supply and other specifications
    Power supply
    Four AA batteries (Alkaline or Ni-MH) USB bus power supplied from a computer AC adaptor (TASCAM PS-P515U, sold separately) External battery pack (TASCAM BP-6AA, sold separately)
    Power consumption
    5.4 W (maximum)
    Dimensions (W × H × D)
    133 mm × 93 mm × 78 mm (with the top adapter attached)
    Weight
    510 g (without batteries)
    Operating temperature range
    0-40 °C


    Manufacturer Part No:

    TASCAMDR60DMK2
    Brand:

    TASCAM

    Product Type:

    -
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    1.01 kg
    PB Part No:

    AUDSMS1109
    Product Model:

    DR-60DMKII



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like