Set your delivery region
Deliver to
Fiji
Update delivery region
30 Days
Returns
View Favourites

All Categories

    Home Printing, Scanning & Office Printer Paper

    Supermicro 1123US-TN10RT Barebone, Dual AMD EPYC, 32 DIMM, 10x 2.5" Hot-Swap U.2 NVMe, 2x 10G RJ-45, 2x 1000W Redundant Power Su

    FJ $5,539.69 excl. VAT

    Supermicro 1123US-TN10RT Barebone, Dual AMD EPYC, 32 DIMM, 10x 2.5" Hot-Swap U.2 NVMe, 2x 10G RJ-45, 2x 1000W Redundant Power Supply

    the selected product is not available.

    Barebone Servers

    Description

    Key Features
    - Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
    - 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors)
    - 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
    Expansion slots:
    - 1 PCI-E 3.0 x16 (FH, 9.5"L) slot,
    - 1 PCI-E 3.0 x8 (LP) slot
    - Integrated IPMI 2.0 + KVM with dedicated LAN
    - Software Out of Band License
    - key (SFT-OOB-LIC) included
    - for OOB BIOS management
    - 2x 10GBase-T LAN ports via Intel® X540
    Drive Bays:
    - 10 hot-swap 2.5" U.2 NVMe drive bays
    - 7.1000W Redundant Power Supplies - Titanium Level (96%) (Full redundancy based on configuration and application load)




    Motherboard
    Model
    H11DSU-iN
    Processor/Chipset
    CPU
    Dual AMD EPYC™ 7001/7002* series Processors (* Board revision 2.x required) Socket SP3 Supports CPU cTDP up to 280W**
    Cores
    Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
    Chipset
    System on Chip (SoC)
    Note
    ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
    System Memory
    Memory Capacity
    32 DIMM slots Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
    Memory Type
    DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
    DIMM Sizes
    4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 Processors)
    Memory Voltage
    1.2V
    Error Detection
    Corrects single-bit errors Detects double-bit errors (using ECC memory)
    On-Board Devices
    IPMI
    Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
    Network Controllers
    Intel® X540 Controller
    VGA
    ASPEED AST2500 BMC
    Expansion Slots
    1U
    1 PCI-E 3.0 x16 (FH, 9.5"L) slot 1 PCI-E 3.0 x8 (LP) slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
    M.2
    1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 via optional cable CBL-SAST-0639 (2240/2260/2280/22110) or 2 Internal M.2 slots via optional cable CBL-SAST-0639 (NVMe 2260 + SATA 2260)
    Input / Output
    NVMe
    10 U.2 NVMe support
    LAN
    2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
    USB
    5 USB 3.0 ports (2 rear + 2 front + 1 Type A)
    VGA
    2 VGA ports (1 rear, 1 onboard)
    Others
    1 COM port 2 SATA DOM power connectors TPM 1.2 header
    System BIOS
    BIOS Type
    AMI 128Mb SPI Flash EEPROM
    BIOS Features
    Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
    Chassis
    Form Factor
    1U
    Model
    CSE-119UTS-R1K02P-N10T
    Dimensions and Weight
    Height
    1.7" (43mm)
    Width
    17.2" (437mm)
    Depth
    27.82" (707mm)
    Package
    8.19" (H) 23.86" (W) 36.14" (D)
    Weight
    Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 kg)
    Front Panel
    Buttons
    Power On/Off button System Reset button
    LEDs
    Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
    Drive Bays
    Hot-swap
    10 hot-swap 2.5" U.2 NVMe drive bays
    System Cooling
    Fans
    8 heavy-duty PWM fans with optimal fan speed control
    Air Shroud
    1 Air Shroud
    Power Supply
    Type
    1000W Redundant Power Supplies with PMBus
    Total Output Power
    800W/1000W
    Dimension
    (W x H x L) 73.5 x 40 x 203 mm
    Input
    100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only)
    +12V
    Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc)
    12Vsb
    Max: 2.1A / Min: 0A
    Output Type
    25 Pairs Gold Finger Connector
    Certification
    Titanium Level96%Titanium Level
    PC Health Monitoring
    CPU
    Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
    FAN
    Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
    Temperature
    Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
    LED
    CPU / System Overheat LED
    Other Features
    Chassis Intrusion Detection Chassis Intrusion Header
    Operating Environment / Compliance
    RoHS
    RoHS Compliant
    Environmental Spec.
    Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)


    Manufacturer Part No:

    AS -1123US-TN10RT
    Brand:

    Supermicro

    Product Type:

    Barebone,
    UPC

    -
    Product Family:

    -
    Shipping Weight:

    27 kg
    PB Part No:

    SVRSPM81007
    Product Model:

    1123US-TN10RT



    Warranty:
    12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Questions?

    In order to assist us in reducing spam, please type the characters you see:

    You may also like